PDA

View Full Version : 1983 parts for sale


project60
05-24-2009, 07:14 PM
I have unfortunately decided to stop my frame off of my 83 FJ60 due to time, money, and work constraints. Check out partial build thread at http://forum.ih8mud.com/60-series-wagons/128847-83-fj60-build-up-thread.html to see procedures and steps. Now that the sob story is done, my loss is your gain.

I will list the parts for sale as I have access to them, so please don't ask for a little plastic interior piece yet as they are bagged and tagged and stored offsite. When I get to that box, I'll post up.

I'll do it on a first come, first serve basis. Cash only. Contact me at 720-819-2307 as it will be easiest to keep up this way. I am in Thornton, CO.

Parts available:
1) Frame - SALE PENDING
2) Mark's v8 adapter SOLD
3) chevy 350 tbi complete SOLD
4) inner fenders radiator support
5) front fenders SOLD
6) front valance SOLD
7) Hood SOLD
8) doors
9) Main Body
9) seats SOLD
10) Sandblaster SOLD
11) Paint supplies SOLD
12) Upper tailgate SOLD
13) lower tailgate SOLD
14) 4 speed tranny and tcase SOLD
15) gas tank
16) Front & Rear Axle SOLD
17) Steering Box SOLD
18) BDS and Ironman Lift Kit - SALE PENDING
19) Fan Shroud SOLD
20) Grill, headlights, headlight surronds, radiator support SOLD
21) Spare tire carrier SOLD
22) Wiring Harness
23) Front Driveshaft
24) Rear Driveshaft
25) Exhaust
26) Free stock springs and shocks
27) Starter Motor
28) Bellhousing, worn clutch and pressure plate
29) Radiator SOLD
30) Glass SOLD

project60
05-24-2009, 07:17 PM
1983 frame. Media blasted, painted with black zero rust. Inner frame rail split from outer to get rid of all rust. Rear pieces replaced with 11 gauge metal (1/8" steel plasma cut). Includes complete painted frame. Will sell for $250 with parts listed.

Front and rear bumper mounts removed.
Tranny xmember can go with it, but it is not sandblasted or painted.
Spare tire carrier can go with it, but it is not sandblasted or painted. SOLD
Rear xmember not attached, it was rotten.

*** SALE PENDING ***

Frame sandblasted:
http://i134.photobucket.com/albums/q95/dbonfoey/100_4298.jpg

Frame painted:
http://i134.photobucket.com/albums/q95/dbonfoey/100_4335.jpg

Rear xmember and spare tire carrier:
http://i134.photobucket.com/albums/q95/dbonfoey/100_6545.jpg

project60
05-24-2009, 07:18 PM
Adapter Sold

project60
05-24-2009, 07:24 PM
Engine Sold.

project60
05-24-2009, 07:27 PM
I got the inner fender wells cleaned up, epoxy primed and in single stage white. No hardware included, it was stripped off. Will sell for $15 each.

RADIATOR SUPPORT SOLD.

Finished state:
http://i134.photobucket.com/albums/q95/dbonfoey/100_6466.jpg

project60
05-24-2009, 07:32 PM
Fenders Sold

project60
05-24-2009, 07:34 PM
Valance Sold

project60
05-24-2009, 07:37 PM
Hood Sold

project60
05-24-2009, 07:39 PM
I have all 4 doors. All are in good shape minus paint. Doors were stripped down, cleaned up, and all rust removed. Dents were hammered out. No paint or body filler applied, so you will need to do this. Will sell for $25 each or $80 for all 4.


Doors:
http://i134.photobucket.com/albums/q95/dbonfoey/100_6352.jpg

project60
05-24-2009, 07:44 PM
I have a body that has 100% of the rust removed and new steel butt welded into place. I have spent MANY hours on this. It is ready for body filler and paint. No seam sealer in it now. Underside is ready for paint, no undercoating. It sits on a steel body dolly that goes with it for free. Will sell as one piece for $125.

Interior roof shot with no insulation:
http://i134.photobucket.com/albums/q95/dbonfoey/100_6357.jpg

Cowl repaired:
http://i134.photobucket.com/albums/q95/dbonfoey/100_6260.jpg

Undercoating removed:
http://i134.photobucket.com/albums/q95/dbonfoey/100_6167.jpg

calphi27
05-24-2009, 07:44 PM
sorry to hear you are doing this. i have been following your build up. good luck with the sale.

project60
05-24-2009, 07:48 PM
Seats Sold

project60
05-24-2009, 07:49 PM
sorry to hear you are doing this. i have been following your build up. good luck with the sale.

Love to keep going, but it's killing me right now. Thanks!

calphi27
05-24-2009, 11:01 PM
would you rent out your sand blaster?
sell/rent your paint gun or left over painting supplies?

have you done anything to your upper tailgate? I have one that I need to repaint, but if you have one sanded down ready to shoot, I may be interested.

project60
05-25-2009, 08:39 AM
would you rent out your sand blaster?
sell/rent your paint gun or left over painting supplies?

have you done anything to your upper tailgate? I have one that I need to repaint, but if you have one sanded down ready to shoot, I may be interested.

No renting, but see my answers in the coming threads.

project60
05-25-2009, 08:43 AM
Sandblaster Sold!

project60
05-25-2009, 08:57 AM
Paint Sold

project60
05-25-2009, 08:59 AM
Upper Tailgate Sold!

project60
05-25-2009, 09:00 AM
Lower Tailgate Sold

wesintl
05-25-2009, 11:35 AM
Too bad.. looks like you had it going on with the build

calphi27
05-25-2009, 12:11 PM
I'll take the upper and maybe some paint stuff. and sandblaster. pmed you

Chris
05-25-2009, 03:24 PM
PM'd you too.

project60
05-25-2009, 07:50 PM
Tranny And Tcase Sold

project60
05-25-2009, 09:25 PM
Gas tank. Not sure if this is the new or recalled version. I never checked the VIN. Anyone know? Either way - $25 takes it with what is shown.

http://i134.photobucket.com/albums/q95/dbonfoey/gastank2.jpg

http://i134.photobucket.com/albums/q95/dbonfoey/gastank1.jpg

project60
05-25-2009, 09:27 PM
Front And Rear Axle Sold

ElliottB
05-25-2009, 11:51 PM
I'll take the lower tailgate and the drivers and passenger fender.

PM sent.

EDIT: May also take the front valence off your hands.

Rzeppa
05-26-2009, 05:50 PM
Man, that's a shame to have to give up your project after having invested to much time and $$.

My daughter may need a few things for her 60 - nothing I've seen listed yet, but right off the top of my head I know both her bumpers are in pretty sorry shape, as are the rear QPs, and she needs a windshield. I'll ask her to make a list and see what you still have.

What became of the original 2F? (No she doesn't need one yet, just curious)

project60
05-26-2009, 10:57 PM
Man, that's a shame to have to give up your project after having invested to much time and $$.

My daughter may need a few things for her 60 - nothing I've seen listed yet, but right off the top of my head I know both her bumpers are in pretty sorry shape, as are the rear QPs, and she needs a windshield. I'll ask her to make a list and see what you still have.

What became of the original 2F? (No she doesn't need one yet, just curious)

Of course you list off the things I don't have!

I don't have a front or rear bumper. The windshield broke upon removal. I may cut the rear quarters up if I can't sell the body. No 2F... sold it a few months back to another Rising Sun member.

zornff
05-27-2009, 06:44 PM
Sent a PM. Mike

RicardoJM
05-27-2009, 06:49 PM
Front axle. Sell for $100 complete from hub to hub. Stock FJ60 3.7x gear ratio. Springs and other stuff in pic not included.

http://i134.photobucket.com/albums/q95/dbonfoey/Frontaxleandliftkit.jpg


Wow, this would be a great deal for someone looking to swap out to disc brakes on their drum brake FJ40. :thumb:

ElliottB
05-28-2009, 10:58 AM
BTT for a great seller. Picked up my parts last night!

project60
05-30-2009, 04:09 PM
I have a BDS and Ironman lift kit. It is the 2.5" to 3" lift kit. Includes front and rear springs with bushings and front and rear shocks. No shackles or springs pins. I bought it used. My guess is less than 5-10k miles on the springs. Will sell as a kit for $300.

** LIFT KIT SALE PENDING ***

http://i134.photobucket.com/albums/q95/dbonfoey/Frontaxleandliftkit.jpg

jettaglxdriver
05-30-2009, 09:37 PM
PM sent about lift kit. Very interested.

jettaglxdriver
05-30-2009, 09:45 PM
I will be calling you tomorrow morning.

ElliottB
06-01-2009, 04:16 PM
Lift kit is MINE! mwuah ha ha ha!

project60
06-02-2009, 08:53 AM
ALL Glass - SOLD

project60
06-02-2009, 08:56 AM
Radiator support - SOLD
Fan Shroud - SOLD
Grill - SOLD
Headlight surronds - SOLD
headlights - SOLD
Rear side marker lights - SOLD

project60
06-02-2009, 08:57 AM
Complete wiring harness, uncut. Will sell for $75 as one piece, no cutting.

project60
06-02-2009, 08:57 AM
Front Driveshaft - $75

Rear Driveshaft - $50

project60
06-02-2009, 08:59 AM
I have the exhaust from the truck if anyone wants it.

Downpipe from exhaust manifold to cat - $10

Cat Converter (any good?) - $10

Exhaust from cat to tailpipe. Looks like a "not original" muffler - $20

project60
06-02-2009, 09:01 AM
I have the stock springs and shocks for free. Only thing I ask is if you want anything - you take it ALL to get it out of my yard. :)

Shocks look not original, but are free to be picked up - Available.
Front springs. Each spring pack has a broken spring - Available.
Rear springs. Military leaves cut - Available.

project60
06-02-2009, 09:03 AM
Starter Motor for 2F. Unsure of condition, never started the truck.

Will sell for $25.

project60
06-02-2009, 09:03 AM
2F bellhousing from said truck. Comes with FREE worn clutch and pressure plate.

Will sell for $25.

ElliottB
06-02-2009, 10:48 AM
FYI, you can take your cat to the scrap yard and get at least $35 for it. They can harvest all of the precious metals from it so they pay good money for them.

rover67
06-02-2009, 11:07 AM
Thanks for the Radiator Shroud!!!

project60
06-03-2009, 09:16 AM
Radiator - SOLD

Chris
06-03-2009, 11:51 AM
I'll take the radiator David.

project60
06-03-2009, 01:03 PM
I'll take the radiator David.


Sounds like you need to make another run up to the house and go shopping! ;)

Chris
06-03-2009, 01:39 PM
If I had the space I'd come with a trailer!

I'll let you know when I can stop by and scavenge for more, until then put the radiator aside with the other stuff discussed.

project60
06-18-2009, 08:15 AM
Lowered prices...

Let me know what you need, I want this stuff out of my garage!

project60
06-21-2009, 06:44 PM
Somebody make me an offer for everything and haul it off. How about 150$ for everything left?

I would like to clear out the garage...

You would get:
* Front and Rear driveshafts
* All interior except seats and dash pad (grey/blue)
* Inner fender wells
* Body
* all door panels and window parts
* starter
* bellhousing and pressure plate
* almost all the nuts and bolts from the truck
* anything else I forgot

project60
06-29-2009, 01:40 PM
I am going to take all the steel to the recycler on Friday 7/3. If you want anything that's left, chime in. After Friday 7/3 it's all garbage!

Rzeppa
06-29-2009, 07:00 PM
Somebody make me an offer for everything and haul it off. How about 150$ for everything left?

I would like to clear out the garage...

You would get:
* Front and Rear driveshafts
* All interior except seats and dash pad (grey/blue)
* Inner fender wells
* Body
* all door panels and window parts
* starter
* bellhousing and pressure plate
* almost all the nuts and bolts from the truck
* anything else I forgot

Are you going to be at the meeting on Wednesday? If so, I'm interested in both front and rear passenger side doors for my daughter's 60. And for myself, I'd be interested in the starter.

project60
06-30-2009, 11:14 AM
Are you going to be at the meeting on Wednesday? If so, I'm interested in both front and rear passenger side doors for my daughter's 60. And for myself, I'd be interested in the starter.

Sorry, I won't be at the meeting Wednesday. Anybody live up north (I-25 and 136th) who can help with delivery?

I'd sell all four doors for $40 or $10 each.

Rzeppa
06-30-2009, 07:10 PM
I'll bring my pickup, but only need the right side doors. And the starter would be nice for a spare.

Chris
07-01-2009, 09:56 AM
Sorry Jeff, My PM that I'd buy the doors beat you. I can pick up the starter for you though.

Rzeppa
07-01-2009, 06:37 PM
Sorry Jeff, My PM that I'd buy the doors beat you. I can pick up the starter for you though.

No worries Chris! Just keepin' my eyes peeled for parts for Jenniee's 60. Her's are dented but still work.

Chris
07-01-2009, 07:03 PM
Cool Jeff, I'll keep a look out for you.

project60
07-02-2009, 10:45 AM
PARTS SPOKEN FOR:
• Lift kit spoken for.
• Doors are spoken for.
• Driveshafts are spoken for.
• Starter spoken for.
• ALL nuts and bolts spoken for.
• Frame
• wheels

PARTS AVAILABLE FOR A PRICE:
• I also have a factory service manual - $20

PARTS AVAILABLE FOR FREE:
• I will GIVE away anything that is not scrap material. I have door panels, carpet, interior pieces, dash, steering wheel, etc.
• Anybody willing to haul off the body. I don't want to pay to rent a trailer to haul it off. Come and get it tonight.

PARTS FOR CHEAP!!!!!!
I am going to the metal scrap yard tomorrow AM (7/3).
• I will sell anything that I can take to the scrap yard for scrap value ($0.05 / pound) or a dollar - whichever is higher.


Call me tonight before heading over:
720-849-2307
David

Chris
07-02-2009, 07:30 PM
No worries Chris! Just keepin' my eyes peeled for parts for Jenniee's 60. Her's are dented but still work.

I brought the starter back with me Jeff. I'll get it to you some time.

Thanks again David. Someone needs what he still has, aren't there any 60 owners any more?

project60
07-03-2009, 12:43 PM
Sorry guys! Everything went to scrap yard.

Thanks to those who swung by for parts!