PDA

View Full Version : Unistrut


DaveInDenver
03-16-2010, 12:59 PM
Does anyone know of a local outlet for aluminum Unistrut? I am looking for the standard width, shallow depth, 14 ga. solid stuff (e.g. 1-5/8" x 13/16", hole-less P4100EA). I just need a few feet and shipping a 4' or 6' length costs as much as the Unistrut itself. Home Depot and what-not seem to only carry the green painted and zinc dipped steel but not aluminum (or the stainless for that matter).

simps80
03-16-2010, 01:12 PM
website says:

The location(s) you have selected:
Electrical Lines
11111 E 53rd Ave, Unit C
Denver, CO 80239

Contact: Sandra Rickerd
Email: srickerd@eleclines.com

Phone (toll free): 800-243-1054
Phone: 303-722-5721
Fax: 303-777-1451

Products: Framing, Fiberglass, Telestrut, Telespar, PrimeAngle, Unihanger, Grating, Roofwalk, Uniport

Estimated Distance: 20 miles


maybe its wrong

DaveInDenver
03-16-2010, 01:35 PM
website says:

The location(s) you have selected:
Electrical Lines
11111 E 53rd Ave, Unit C
Denver, CO 80239

Contact: Sandra Rickerd
Email: srickerd@eleclines.com

Phone (toll free): 800-243-1054
Phone: 303-722-5721
Fax: 303-777-1451

Products: Framing, Fiberglass, Telestrut, Telespar, PrimeAngle, Unihanger, Grating, Roofwalk, Uniport

Estimated Distance: 20 miles


maybe its wrong
I had an email into them and waiting for a response. They are the local rep, but not the stocking distributor.

simps80
03-16-2010, 02:05 PM
got it

jettaglxdriver
03-16-2010, 02:08 PM
The thing with supply houses like Grainger, Graybar, etc is I'm sure they are going to make you buy a 10' stick.

FJ_Mark
03-16-2010, 05:48 PM
I was going to say Graybar or Grainger. I work telecom and we use it all the time. I will see if anyone has a stick around they can give up.

corsair23
03-16-2010, 05:57 PM
I was going to say Graybar or Grainger. I work telecom and we use it all the time. I will see if anyone has a stick around they can give up.

:thumb: - I gave up trying to buy some after fruitless searches and found some stuff that was going to be thrown out at work...Unfortunately it isn't the stuff Dave is looking for as what I got was the green painted steel stuff.

DaveInDenver
03-16-2010, 06:14 PM
I ended up ordering a section from McMaster. They do partial lengths in one foot increments.