PDA

View Full Version : Brake booster/pedal issues... after swap.


Rezarf
04-24-2006, 06:19 PM
Howdy everyone,

Well, as the story goes, one week before Moab, I am having some issues getting a new to me booster to act right in my 76 fj40. I scrounged a booster from a mid 80's minitruck and bolted it up instead of the old one.

Now, my pedal is nearly at the end of the booster travel right as the lights come on. I know I have NO play between the rod and master cylinder, I can literally feel the brakes are on before I even step on them.

I know I can adjust the rod on the booster that connects to the pedal arm, but that is only going to get me a half inch or 3/4" at best.

Any ideas of what to look for? Am I missing anything?It seems like I need to space the booster off of the firewall, but I am not sure if that is a good idea.

FWIW, I did not bleed the system because I never removed a hard line. Could this make a difference?

Clueless, thanks! :D

Rezarf <><

Rezarf
04-25-2006, 12:31 PM
Had to shorten the shaft from the booster to the pedal. Easy fix...

One step closer to CM06!

Drew