View Full Version : Front & Rear D44's set up for a Pickup

05-05-2010, 01:53 PM
I'm getting these as part of a package deal and don't need them. 3.73 gears, welded rear, limited slip front, came off a 72 K5 originally, most recently under a 91 Toyota Pickup. Crossover steering with drag link and tie rod, leaf front setup and 4 link rear setup. Disk front, drum rear. $250 for the pair. PM me with questions.

05-05-2010, 09:31 PM
Update, pretty sure the rear is actually a 12 bolt. Either way, burly set of axles, held up to 38's just fine.

05-07-2010, 07:46 AM
Bumping this, selectable hubs up front. I'm a bit flexible on price and would trade for a cut/turn on my front axle or a pre-cut/turned housing.

Air Randy
05-07-2010, 09:33 AM
You may want to post this up on the CO4x4 site as converting to D44's & 12 bolts is a pretty common upgrade for Jeeps. Most of the Toy folks go with 1 tons or hybrids if they update axles.

05-07-2010, 10:16 AM
Already up over there, thanks for the heads up. I thought 3/4's were in higher demand, apparently not. May just have to save them for a project.

05-08-2010, 07:14 PM
My wife wants these out of the garage. Any reasonable offer for all or part of either axle won't be turned away.

05-18-2010, 08:48 AM
Bumping this one last time with a few notes. Looked closer at the D44, it has Pro Comp hubs (lifetime warranty). I'm also probably selling wheels/tires too, 38x12.5x15 Swamper TSL's, old but still have at least a season left in them. Currently on 15x10 6 on 5.5 wheels. Tires are $225, tires and wheels are $300, add the D44 to either combo for $125, the 12 bolt for $100, or both for $200.

05-19-2010, 08:40 PM
Axles are sold, delete thread please mod. Thanks!