PDA

View Full Version : Carb Spacer Plate


RicardoJM
07-04-2010, 11:41 AM
I removed the carb this morning (installing my remflex gasket) and took a good look at the carb spacer and notice that the built in gasket is not good. Does anyone have a carb spacer for the F engine. This would be the part that looks like burgundy plastic and has a vacuum tube that points out towards the front of the truck.

Shark Bait
07-04-2010, 11:56 AM
I removed the carb this morning (installing my remflex gasket) and took a good look at the carb spacer and notice that the built in gasket is not good. Does anyone have a carb spacer for the F engine. This would be the part that looks like burgundy plastic and has a vacuum tube that points out towards the front of the truck.

Ricardo,

I might still have one for a 2F. Will that work?

RicardoJM
07-04-2010, 01:58 PM
Ricardo,

I might still have one for a 2F. Will that work?

Chris, they are different. The ones for the 2F do not have a tube, the tube is typically used to connect vacuum to the PCV. In a pinch, I could connect the PCV to another vacuum source.

rover67
07-04-2010, 07:07 PM
I have one from a 2f that has a tube in it.... It's just sitting under the work bench