PDA

View Full Version : Garage Sale with LOTS of stuff...


Rezarf
07-29-2010, 09:09 PM
We have decided to move to gain a bit more space. I have been hauling and storing cruiser crap for too long. I am not going to move any of this stuff. First I'll take it, gets it... please leave the # of the thing you want so I can cross it off the list. I will give RS till the meeting then its all going on CL.

PayPal or Cash!, I can deliver to the meeting next week, or the 40's run in two days. Check back as I am going to be adding a lot of stuff as I go through the garage.

If I am way off on the price, let me know... the worst I can do is politely decline your offer.:thumb:

Two big ticket items:

1)FJ40 hard doors. Late model. Hinges, glass, interior door panels, very complete. Typical rust issues on the bottom, but they are no worse than the ones in my cruiser at the present time. I planned on chopping them into half doors... 10 years ago when I got them.

These late models are harder to come by. I am looking for $500 on the set. I can get pics if you are really interested as they are burried under other stuff right now.

2) FJ40Aux gas tank by Con-ferr. 22 Gallons, good condition without rust. This will come with the straps to mount it, an electronic soleniod switch to pull gas from the aux, not the main tank, and a FJ40 gas door/pocket that I cut out of a 76 FJ40 to weld into the tub of my cruiser. I have never had the time/motivation to actually install it. $500 for everything.

The smaller bits:

Yakima stuff- ALL SOLD

Rezarf
07-29-2010, 09:10 PM
8)Good working electric heater. 110v, nice for working at the work bench. Has a tip over safety switch. Works great, just use gas now. $10

Rezarf
07-29-2010, 09:12 PM
Sold

Rezarf
07-29-2010, 09:14 PM
Sold

Rezarf
07-29-2010, 09:17 PM
11) U-bolt flip kit. Got this from Chris in a pinch at Moab '08. They get your ubolt nuts off the rocks. A little wide for a 40's spring pack. Well made, maybe for a 60? I paid $100 for the set. $50 takes it all, ubolts, skid plates, hardware.:thumb:

Rezarf
07-29-2010, 09:21 PM
12) Rear tranny engine mount 76 Fj40. May fit other years, check it out on MAF or SOR. New in the plastic $8.

Rezarf
07-29-2010, 09:23 PM
13) Sheet metal forming tool/die. This thing (http://www.harborfreight.com/18-inch-sheet-metal-fabrication-kit-34104.html) pretty sweet little tool. Still in the box with the anit-rust grease applied. $80

Rezarf
07-29-2010, 09:24 PM
14) Trialer lid clamps. Went a different route. Great for clamping down any kind of lid, catches included (4 at least). $5 for all of them.

Rezarf
07-29-2010, 09:27 PM
15) Angle Grinder. Harbor frieght. Bought a DeWalt to tackle the trailer, this on is like new, with a few flap disks and wheels, wrench and an extra set of brushes. Box says $29.99. Looking for $15.

Rezarf
07-29-2010, 09:29 PM
Sold

Rezarf
07-29-2010, 09:30 PM
16) Spindle Nut socket for older birfields. SOR sent me the wrong one, and gave me a hassle about returning it. Never returned it just to spite them. $5 makes a good trail tool.

Dr. Schlegs
07-29-2010, 09:31 PM
Sold!!!

9) Fj40 U-bolt Skid Plates. Went With Maf, These Are Collecting Dust. Seem To Be Well Made. Never Installed. $30 For The Pair.

Rezarf
07-29-2010, 09:32 PM
Sold

Rezarf
07-29-2010, 09:33 PM
18) Heater port/radiator lower tube. Free to good home.

Rezarf
07-29-2010, 09:35 PM
19) Distibutor. Doesn't spin uber freely, but has a good cap and rotor. It is from a 76 fj40. $10 I went electronic and haven't looked back.:thumb:

Rezarf
07-29-2010, 09:38 PM
20) Late model roll bar attachments with 3 point belt anchor. Easiest way to upgrade to 3 point belts in a 40. With the rubber pads. These are in good shape. $15 for the pair.

Rezarf
07-29-2010, 09:40 PM
21) FJ40 original jack assembly... less the jack. As far as I know it is all there, including the hardware. Kinda' getting harder to find, this one is in very restorable shape. $25 takes it. SPF to CardnialFJ60!

Rezarf
07-29-2010, 09:48 PM
Sold

Rezarf
07-29-2010, 09:50 PM
23) Craftsman cordless drill. Needs a new battery. $5 if you want to deal with it. ;) Worked fine, but needs a new battery. I have the other battery and charger around somewhere... $8 to make me go look for it! just kidding ;)

Rezarf
07-29-2010, 09:52 PM
24) Big fat sheet of Aluminum diamond plate. Makes a good improvised welding table. Probably an honest 1/4" thick and measures about 42x18" I use it all the time, just don't want to move it. It clamps great to a saw horse for a cheap welding table. Would make a good FJ40 taligate as well. Looking for $15 SPF to timztoy!

Rezarf
07-29-2010, 09:57 PM
25) Fel-pro gasket for oil pan. Unopened. Its the one part of my 40 that DOESN'T leak. Go figure ;) Looks like from the lable it fits F, 2F and 3FE engines. $8 bucks? I have no idea what these cost.

Rezarf
07-29-2010, 09:58 PM
Sold

Rezarf
07-29-2010, 10:02 PM
A few other random things that I couldn't get good pics on...

27) fj60 fan shroud. $5

SOLD

SOLD

SOLD

31) FJ40 gas pedal assembly. Really nice shape with no rubber pad. $5

Rezarf
07-29-2010, 10:02 PM
Tomorrow I am digging up the trailer box of left-overs.... stay tuned!

Rezarf
07-29-2010, 10:03 PM
Sold!!!

You got it Doc! :D

Hulk
07-30-2010, 03:40 AM
28) FJ40 license plate assembly with working lights. I have two ($20 for the nice one, just came off my 40... and

29)$10 for the one that needs some love, its got some surface rust.).


I'll take both of the license plate assemblies. (Art Hog, I got your back.)

How do I get money to you and parts in return. I am not in a hurry to get the parts, but I am glad to send you money now.

MountainGoat
07-30-2010, 06:15 AM
17) 76 Fj40 starter. This could be the gear reduction model. Someone may know more. Worked fine when I pulled it off. Swapped in a fj60 motor and starter so this ones just sitting around. Looking for $20
...
30) Front license plate braket fj40, factory. Needs work $5

I will take these. Cash at the meeting Weds?

Rezarf
07-30-2010, 07:26 AM
I'll take both of the license plate assemblies. (Art Hog, I got your back.)

How do I get money to you and parts in return. I am not in a hurry to get the parts, but I am glad to send you money now.

I will take these. Cash at the meeting Weds?

You got it fellas. Cash is King! However, I can do paypal as well. I can bring it all to the Wednesday meeting, you can pick it up in Louisville, or the 40s run.

:thumb:

Rezarf
07-30-2010, 07:30 AM
I'll take both of the license plate assemblies. (Art Hog, I got your back.)

How do I get money to you and parts in return. I am not in a hurry to get the parts, but I am glad to send you money now.

You got it Matt, Paypal or cash is fine.

Rzeppa
07-30-2010, 08:57 AM
26) Beat up skid plate for fj40 4 speed. $10

Sold!

I plan to be at the 40s run tomorrow :thumb:

RockRunner
07-30-2010, 09:08 AM
10) CO2 tank base and mesh cover thingy... for a 15lb bottle I think. Used for scuba tanks... sharkbait!? Both are new. $5 for both.


I'll take these please. And the purple lights too.

Are you goig to be at the swap meet?

RockRunner
07-30-2010, 09:13 AM
22) Insulated Carhart Jacket mens XL. with hood Nice and warm for winter wrenching. $15 A little blue over spray on it to match my trailer ;)


I'll take this too, that tmakes two things :cheer: I get the lifghts for free:rolleyes::bolt:

Rezarf
07-30-2010, 09:42 AM
Sold!

I plan to be at the 40s run tomorrow :thumb:

Its yours Jeff! :thumb:

Rezarf
07-30-2010, 09:45 AM
I'll take these please. And the purple lights too.

Are you goig to be at the swap meet?

I'll take this too, that tmakes two things :cheer: I get the lifghts for free:rolleyes::bolt:

You got it bud...

CO2 tank stuff, Carhart and the Neon! :D:thumb:

I am sure I can find someone to bring them to the rally, but I have a wedding.:thumb: Lets figure it out over PMs.

CardinalFJ60
07-30-2010, 09:59 AM
I'd be happy to drive your place and take this jack mount stuff.



21) FJ40 original jack assembly... less the jack. As far as I know it is all there, including the hardware. Kinda' getting harder to find, this one is in very restorable shape. $25 takes it.

Rezarf
07-30-2010, 10:03 AM
I'd be happy to drive your place and take this jack mount stuff.

Its all yours Shawn. Come and get it... I am around all day ;)

rover67
07-30-2010, 10:09 AM
hey man, i'll take the starter!

CardinalFJ60
07-30-2010, 10:15 AM
Its all yours Shawn. Come and get it... I am around all day ;)

I'll give you a ring on my way home...and on the way to the street fair in Old Town...you guys wanna go there, too? Is your kiddo driving yet? ;)

Dr. Schlegs
07-30-2010, 10:19 AM
Drew I will be at the 40's run. How about $20 and a bit of my PB&J? :lmao: $30's good I would never share a PB&J.

Rezarf
07-30-2010, 12:14 PM
I'll give you a ring on my way home...and on the way to the street fair in Old Town...you guys wanna go there, too? Is your kiddo driving yet? ;)

We're going out for dinner so I may be away when you call. :thumb:

Rezarf
07-30-2010, 12:14 PM
Drew I will be at the 40's run. How about $20 and a bit of my PB&J? :lmao: $30's good I would never share a PB&J.

Sounds good Doc.:thumb:

corsair23
07-30-2010, 01:32 PM
I'd be happy to drive your place and take this jack mount stuff.

Shawn, do you by chance need the jack handle pieces to go along with your smancy new jack mount? :D

CardinalFJ60
07-30-2010, 02:11 PM
totally cool...worst-case scenario, I'll come over early in the AM. I'm hittin' Big O for an alignment first thing and can swing by before I go there. I assume you're leaving fairly early?

Rezarf
07-30-2010, 07:43 PM
0745 we are leaving.

I am around still tonight, I will PM you my number.

Rezarf
07-30-2010, 07:47 PM
hey man, i'll take the starter!

Marco- you have seconds MountainGoat beat you to it.

Rezarf
07-30-2010, 07:47 PM
So I am bringing Jeff Z's skid plate and the good Doctor's ubolt flip plates... anyone else? To the 40's run. Hulk you gonna make it? Anyone else?

Drew

rover67
07-30-2010, 08:07 PM
Martin- you have seconds MountainGoat beat you to it.

No Problem Matt! just lemme know!

MountainGoat
07-30-2010, 09:41 PM
So I am bringing Jeff Z's skid plate and the good Doctor's ubolt flip plates... anyone else? To the 40's run. Hulk you gonna make it? Anyone else?

Drew

You can bring my starter and front license plate bracket. See you there! :thumb:

corsair23
07-31-2010, 01:02 AM
Hulk you gonna make it?

Hulk's camping this weekend so I doubt he'll be there :hill:

Rezarf
08-02-2010, 09:37 AM
Bump, I can bring any of this stuff to the meeting this week! :D

Hulk
08-02-2010, 10:02 AM
Bump, I can bring any of this stuff to the meeting this week! :D

Sounds good. I will be at the meeting on Wednesday. :thumb:

TIMZTOY
08-02-2010, 03:28 PM
24) Big fat sheet of Aluminum diamond plate. Makes a good improvised welding table. Probably an honest 1/4" thick and measures about 42x18" I use it all the time, just don't want to move it. It clamps great to a saw horse for a cheap welding table. Would make a good FJ40 taligate as well. Looking for $15
I'll take the aluminum sheet !!

Rezarf
08-02-2010, 04:47 PM
I'll take the aluminum sheet !!

SOLD! Are you at the meeting this wednesday?:thumb:

subzali
08-02-2010, 07:17 PM
No Problem Matt! just lemme know!

Drew, did he just call you Matt? :lmao:

Or was he calling Dan Matt? :p::brick:

Rezarf
08-02-2010, 08:03 PM
Drew, did he just call you Matt? :lmao:

Or was he calling Dan Matt? :p::brick:

Naw, I called Marco, Martin... he was getting me back.

How you been Subz?:thumb:

RockRunner
08-02-2010, 09:47 PM
If you are going to be at the meeting can you bring the stuff I bought from you? I should be there too.

Rezarf
08-02-2010, 09:49 PM
If you are going to be at the meeting can you bring the stuff I bought from you? I should be there too.

You got it!

Drew

corsair23
08-02-2010, 10:10 PM
If you are going to be at the meeting can you bring the stuff I bought from you? I should be there too.

Bring extra money Tom as I'm still holding something for you as well :)

corsair23
08-02-2010, 10:11 PM
I'll take the aluminum sheet !!

SOLD! Are you at the meeting this wednesday?:thumb:

Drew,

Bring it and if Tim can't make it I'll grab it and pay for him and then get it to him :thumb:

rover67
08-03-2010, 07:11 AM
naw, I Called Marco, Martin... He Was Getting Me Back.

How You Been Subz?:thumb:

:d

Rezarf
08-03-2010, 10:47 PM
Drew,

Bring it and if Tim can't make it I'll grab it and pay for him and then get it to him :thumb:

Thanks Jeff-:thumb:

RockRunner
08-04-2010, 07:55 AM
Bring extra money Tom as I'm still holding something for you as well :)

Untill Tim told me a while back I totally forgot. I WILL be there today!!!

Rezarf
08-04-2010, 12:11 PM
Last bump, I can bring anything tonight if you want it.

Drew