PDA

View Full Version : Wanted: IFS Cross Member


DaveInDenver
09-08-2010, 12:13 PM
Looking for anyone who has done an SAS or has a bunch of extra IFS parts laying around. I need the lower cross member with the 4 bolts. This part is where the front of the diff attaches with the single horizontal bolt. Where the bottom 2 bolts for the skid plate go.

20757

AxleIke
09-08-2010, 02:24 PM
Dave, I have one. Not sure I have all the bolts though. Its a spare I picked up from a guy who did a SAS.

LMK when you need it.

DaveInDenver
09-08-2010, 02:51 PM
Dave, I have one. Not sure I have all the bolts though. Its a spare I picked up from a guy who did a SAS.

LMK when you need it.
Don't need the bolts, just the cross member (going back and reading the post, that I did not need the bolts was unclear). The two captured nuts for the skid plate are broken loose on mine and so I can't put one back on. No huge rush, I'll let you know next time I'm near Boulder. Thx.

AxleIke
09-08-2010, 04:12 PM
I live in Arvada now. Just off of 36 and sheriden.