PDA

View Full Version : can I install an ARB locker in an E locker high pinion?


RockRunner
03-24-2011, 12:55 PM
So my motor on my front locker has given up :mad: It is hard to only find a motor so I would have to buy the entire locker assembly and that is expensive.

So the question is can I install an ARB in my E locker High pinion third? :confused:

waggoner5
03-24-2011, 01:14 PM
Most of the time, you can take the motor apart, clean everything and reassemble. You do have to mark the clocking of the gears so you get it back together right.

RockRunner
03-24-2011, 07:29 PM
I am going to try that, I did that once before and made my own contacts. May try that Saturday night, don't I live an exciting life :rolleyes:

slowtoyota
03-27-2011, 09:25 PM
I have an open high pinion third you could definately put a ARB in that I would trade and add in some $.

RockRunner
03-27-2011, 09:33 PM
Sounds interesting. I will try to rebuild the motor first and go from there.

TIMZTOY
03-27-2011, 11:07 PM
not unless the arb, comes with that large 4-5" bearing on the lock side, that the e-locker has.. or have somthing machined up to adapt a smaller bearing into a elocker bearing location.