PDA

View Full Version : Free F/2F engine stuff


Air Randy
05-31-2011, 09:09 AM
I have a bunch of motor stuff I want to get rid of. I have a 1F and a 2F style fly wheels, good condition. I have some non-gear reduction starters, an alternator or two, metal valve covers, coarse spline hubs, I may have some wheel hubs and knuckles. Come and pick through the pile, anything left over goes to scrap within a week. I have a bare 40 rear axle housing.

L43dean
06-03-2011, 09:36 AM
I have a bunch of motor stuff I want to get rid of. I have a 1F and a 2F style fly wheels, good condition. I have some non-gear reduction starters, an alternator or two, metal valve covers, coarse spline hubs, I may have some wheel hubs and knuckles. Come and pick through the pile, anything left over goes to scrap within a week. I have a bare 40 rear axle housing.

Hello Randy, I'll take the F and course spline stuff for my 68 if you still have it. I'll be around this eve and most of this weekend. Thanks! Dean

Air Randy
06-03-2011, 04:59 PM
We'll be around tomorrow afternoon after 4 PM and Sunday morning until about 1 PM. Give me a call and we can set a time that works for you.

L43dean
06-04-2011, 02:35 PM
PM sent

subzali
06-06-2011, 10:47 AM
Randy, do you happen to have the u-shaped radiator support or a 2F air cleaner housing?

L43dean
06-06-2011, 03:33 PM
Matt, amongst the parts I recieved from Randy was a 2F air cleaner housing. You can have it if you like. No radiator frame though. Dean

corsair23
06-06-2011, 04:21 PM
Hey Dean, do you have any interest in a 1F air cleaner housing with no lid? I can't remember where I got it but as I recall Matt picked up a bunch of stuff that was going to be thrown away a few years back and I thought it was a 2F air cleaner housing when I put dibs on it. I don't have a use for a 1F air housing but I hate to just toss it...

Matt, I've got a couple carbs in the garage but I have no clue what years they are from. Got them from Nathaniel for :beer: back when I was contemplating going back to stock...Ricardo has looked at the carbs so he might know more about what years they are maybe...

Sorry for the hi-jack Randy :hill:

subzali
06-06-2011, 04:48 PM
I'm your huckleberry Dean. I can wait until the next meeting or I can try to meet up with you - I work at Iliff and Peoria, don't know how close that is to you.

Jeff - I'll pm you and Ricardo.

Thanks :thumb:

L43dean
06-06-2011, 05:33 PM
[QUOTE=corsair23;184614]Hey Dean, do you have any interest in a 1F air cleaner housing with no lid? I can't remember where I got it but as I recall Matt picked up a bunch of stuff that was going to be thrown away a few years back and I thought it was a 2F air cleaner housing when I put dibs on it. I don't have a use for a 1F air housing but I hate to just toss it...



Jeff; I'll take you up on the housing. I should fabricate a snorkel with the spare. Don't tell anybody on exhibition portal. Thank you, Dean.

L43dean
06-06-2011, 05:46 PM
Matt, I'm just about a mile or two away. I am flexible, but I feel certain that the best location for 2F parts inspection and analysis must be the Dry Dock Brewery. It is located at Hampden and Chambers. A good Gyro place next door too! Dean

Air Randy
06-07-2011, 09:23 AM
Randy, do you happen to have the u-shaped radiator support or a 2F air cleaner housing?

Actually, I do have the housing that goes around the outside of the radiator, it's from a 1980 FJ40. I had it stored separately with the radiator I'm keeping for a spare. It's yours if you want to come down and get it.

subzali
06-07-2011, 09:33 AM
Thanks Randy, I'll stop by as soon as I can. Let me take care of some stuff here at work and my schedule should open up a bit so I can sneak out of work early and head down there.

L43dean
06-08-2011, 12:53 PM
Matt, I'm in no hurry. I will hang on to the air cleaner housing until we meet up. The part # stamped underneath is 014000-8000. Dean

Air Randy
06-08-2011, 01:31 PM
Everyone, I found a few more items in the attic.

I have a 2F OEM intake & exhaust manifold in good shape. That should be worth a case of beer.

And, drum roll please........I also found a engine hand crank rod. That should also be worth a case of beer. :D

L43dean
06-08-2011, 02:41 PM
I'll take the crank rod. What beer would you like a case of? Dean

FJBRADY
06-08-2011, 02:47 PM
I'll take the crank rod. What beer would you like a case of? Dean

Allow me to speak for Mr. Rosetta.........:drumsticks:Bud Light!

Air Randy
06-08-2011, 03:13 PM
Allow me to speak for Mr. Rosetta.........:drumsticks:Bud Light!

Bud Light is just fine. It's not my most favorite beer but it's OK and it's reasonably priced.

Besides, it will just go in the garage fridge anyways and I don't want to be handing out the good stuff to Steve when he comes over to watch everyone else work :D

FJBRADY
06-08-2011, 03:21 PM
I don't want to be handing out the good stuff to Steve when he comes over to watch everyone else work :D

Who me, wha? I resemble that comment.:beer2:

I may have a, need to use the lift, project in a month or so. Keep the fridge stocked.:thumb:

SteveH
06-08-2011, 03:55 PM
The manifold pair interests me - I sent a PM - thanks!

Air Randy
06-08-2011, 07:20 PM
Who me, wha? I resemble that comment.:beer2:

I may have a need to use the lift project in a month or so. Keep the fridge stocked.:thumb:

The plan is to get it installed either Saturday or Sunday this coming weekend :clap: this is going to be so cool :D

MDH33
06-09-2011, 12:04 PM
Everyone, I found a few more items in the attic.
I have a 2F OEM intake & exhaust manifold in good shape. That should be worth a case of beer.



The manifold pair interests me - I sent a PM - thanks!

Put me in line if Steve doesn't need it. I'm looking to replace my header and exhaust with a stock setup in order to be able to connect my PTO driveline.

:beer:

Air Randy
06-09-2011, 07:39 PM
I've not heard back from Steve. You guys figure out who needs it and let me know.

Dr. Schlegs
06-09-2011, 08:15 PM
I MIGHT have an extra header and exhaust manifold as well if you are in need.

Air Randy
06-10-2011, 09:09 AM
I MIGHT have an extra header and exhaust manifold as well if you are in need.

Yours doesn't even run yet. I wouldn't be giving stuff away until you know for sure you're not going to need it yourself. :D

MountainGoat
06-10-2011, 09:18 AM
Yours doesn't even run yet. I wouldn't be giving stuff away until you know for sure you're not going to need it yourself. :D
:lmao:

FJBRADY
06-10-2011, 09:36 AM
X3 :lmao:

:cheers:

Dr. Schlegs
06-10-2011, 09:50 AM
HAHA funny funny.

SteveH
06-10-2011, 10:54 AM
I have a manifold pair lined up from a buddy in SLC - so it's all yours, Martin - thanks!

Dr. Schlegs
06-10-2011, 11:10 AM
I have a manifold pair lined up from a buddy in SLC - so it's all yours, Martin - thanks!

Oh, good cause Uncle Randy says I shouldn't be giving mine away. :D