PDA

View Full Version : Wanted: 16" wheels


loudbay
10-19-2011, 12:06 PM
I'm looking for some CHEAP/FREE 16" wheels.

UPDATED with some items to trade below.

I'd be happy to trade my 15" land cruiser alloys. Maybe a tacoma / 4 runner guy trying to go to 15s?

Thanks a lot,
Matt

Corbet
10-19-2011, 01:16 PM
from down the page a little. Not free but very good deal:

http://risingsun4x4club.org/forum2/showthread.php?t=16364

MDH33
10-19-2011, 01:37 PM
What backspacing do you need? I might have a set.

loudbay
10-19-2011, 06:33 PM
I saw the nice set of fzj wheels offered up here, but i'm in a negative cash flowsituation for the next few months...

As for the offset. 4.5 for a fj80 would be ideal, but I'd take the 4.0 tacoma offset and deal with reduced track width temporarily. Even a bit more to 5.0 would prob be fine. 7" or 8" width is fine.

Thanks alot guys.

loudbay
10-20-2011, 11:48 AM
Alright, I came up with a few things for barter...

The rack: I'd prefer to keep the wind/sticker barrier for posterity sake.
Front: Yakima bars are rusted, towers, and yakima basket are still in great condition, lock and key available.
Rear: Basket is bent, and re-bent, mounts to factory cross bars.

New Hella 500s: Box isn't perfect, but everything (switch, wiring, etc.) is accounted for.

The stock 15" wheels: Here they are... I'll remove the tires.

I'm really open to any 16" Land Cruiser, tacoma, 4runner, sequoia, tundra wheels. Alloys would be preferable, but beggars can't be choosers. I'll mount up anything!

Thanks again guys.

Cheers,
Matt

MDH33
10-20-2011, 11:59 AM
Matt, the wheels I have aren't going to have enough backspacing, unfortunately. Have you called Yota Jim to see what he has? I got some steel wheels for $20 apiece from him.

loudbay
10-20-2011, 12:20 PM
Matt, the wheels I have aren't going to have enough backspacing, unfortunately. Have you called Yota Jim to see what he has? I got some steel wheels for $20 apiece from him.

Thanks Martin, I'll work on that line too. Thanks again.

Matt

coax
10-22-2011, 12:09 PM
I *might* have a line on some 16" taco/tundra steelies (spares) that could be sold for quite cheap. Requires some investigation on my part, but I'll let you know.

loudbay
10-24-2011, 01:54 PM
I got my hands on some Taco steelies. Thanks everybody!

Red72FJ40
10-24-2011, 05:54 PM
I *might* have a line on some 16" taco/tundra steelies (spares) that could be sold for quite cheap. Requires some investigation on my part, but I'll let you know.

Hey, I might be intererested if you can find'em. Please let me know.