PDA

View Full Version : Wanted: round tube


subzali
05-29-2012, 09:05 AM
I have a project that needs about 63" of round tube. Anybody have a drop laying around they want to get rid of? Pay you fair price per foot.

Anything from 1.75" OD 0.120" wall and up will be fine. If you have something with thinner wall let me know and I'll see if it'll still work.

EDIT: I also may need some scrap pieces of 3/16" or so plate - most pieces will be smaller than 2" x 4" or 3" x 3" or so. I think I have some but I need to check what I need.

Just not sure it's worth a trip to the scrapyard if I can dig up this stuff from folks I know who need to get rid of it anyway.

Air Randy
05-29-2012, 09:34 AM
Does it need to be a continuous 63" stick? I have a roll bar with braces out of the Meanie that is either 1.75" or 2" .120 wall. Total linear feet of tube is probably 10'. There is at least 1 straight run thats 4' long and then several others that are 2-3' long. Come and pick it up if you can use it.

subzali
05-29-2012, 09:36 AM
I would prefer for it to be a continuous straight run, but I'll take you up on that if nothing else comes through! Thanks!

rover67
05-29-2012, 09:55 AM
I got some 1.5" OD stuff.

subzali
05-29-2012, 10:05 AM
Do you know the wall thickness Marco?

subzali
05-29-2012, 10:11 AM
Also,

EDIT from above: I also may need some scrap pieces of 3/16" or so plate - most pieces will be smaller than 2" x 4" or 3" x 3" or so. I think I have some but I need to check what I need.

Just not sure it's worth a trip to the scrapyard if I can dig up this stuff from folks I know who need to get rid of it anyway.

rover67
05-29-2012, 10:58 AM
it is like .120" wall.

stuff for sliders is what it was.