PDA

View Full Version : 99 100series stuff for sale


Timbaworks
10-27-2012, 11:22 AM
I have a rear end.. complete with locker for $700. Set of 5 rims painted black for $100. A 2.5" slee lift kit and diff spacer kit medium for $400. It all came off a 100 series solid axle conversion with 80series locked gear. The lift was on the car for 6mths and looked great. It is missing two shocks. Call Tim 719 660-9642

wesintl
10-27-2012, 12:05 PM
which rear springs in the lift? is the spacer kit the diff drop? pics?

Timbaworks
10-27-2012, 02:37 PM
Yes, the spacer is the diff drop which has two oversized washers and the diff drop bar. Two torsion bars for the front and two springs for the rear. Old man emu shocks... Only two.

xodeuce
10-27-2012, 03:07 PM
Any chance on shipping the rims?

wesintl
10-27-2012, 03:23 PM
which rear springs? 860,865,866 or Sof2rh?

Timbaworks
10-27-2012, 04:47 PM
Slee website lists the rear springs as 860. It is the Medium 2.5" option. Retail is $1075. But it is missing the front shocks becasue they were still useful on the solid axle conversion. http://www.sleeoffroad.com/products/100_suspension.htm
I can ship the rims but it would cost at least $28 per box X 5. So I don't know if it is worth it.

Fishy
10-27-2012, 06:02 PM
PM sent on the wheels.

cruiseroutfit
10-28-2012, 01:13 AM
Just to confirm, the rear axle is a stock 100 Series with the factory e-locker?

Anyone coming out to SLC? :D

Fishy
10-28-2012, 09:05 AM
PM sent on the wheels.

No response.....

Timbaworks
10-28-2012, 09:48 AM
Fishy?? don't understand.
The rear axle is stock with e-locker and is complete from the calipers, rotors etc all the way up. My friend was trying to keep the rear assembly in the solid axle conversion but had issues with width, stud pattern, gearing etc so he just decided to put the whole 80 series under the 100.

Fishy
10-28-2012, 10:28 AM
I sent you a PM about the wheels. I wasn't the one asking about the rear. I'll resend.

cruiseroutfit
10-30-2012, 03:23 PM
Fishy?? don't understand.
The rear axle is stock with e-locker and is complete from the calipers, rotors etc all the way up. My friend was trying to keep the rear assembly in the solid axle conversion but had issues with width, stud pattern, gearing etc so he just decided to put the whole 80 series under the 100.

Would you mind snapping a picture or two? Has the e-locker harness plug been cut? Brakelines all in place and intact? Rust? Wheel studs in usable shape?

Thanks for your help on this!

-Kurt

wesintl
10-30-2012, 03:26 PM
http://denver.craigslist.org/pts/3352095840.html

cruiseroutfit
10-30-2012, 08:21 PM
http://denver.craigslist.org/pts/3352095840.html

:cool:

Sweet, anyone up for storing that for me until I can find a ride to Utah for it?

Old40Dog
10-30-2012, 09:07 PM
:cool:

Sweet, anyone up for storing that for me until I can find a ride to Utah for it?

Kurt, I can do that 4U. Call me. PM sent.

cruiseroutfit
10-31-2012, 11:52 AM
Kurt, I can do that 4U. Call me. PM sent.

:cool:

I'll be in touch!

Timbaworks
10-31-2012, 03:54 PM
Kurt, the unit was unbolted with nothing cut. The posting is up now so you can see it... I am new to this forum but I will get better with pics etc. I am 18mile out of Colorado Springs on the way to The Gulches in Divide. I even saved the little bolt that pins the push arm on the locker.. it needed to be plugged in to put it back in I think. I have a set of wheel spacers and a spare front axle aswell.

Timbaworks
11-04-2012, 07:33 PM
The Lift Kit has been sold. Still available is the set of 5 rims with a spare 315/75-16 tire in good condition... $100. A front axle original Toyota part for 100 series $150.00 one only. The rear axle assembly with locker and calipers and brake lines and rotors all in excellent conditon ready to bolt up $700... this is heavy... really has to be local pickup. Hope some of this stuff can help someone!!

MTSN
11-05-2012, 10:29 AM
Thanks for the lift Tim! I'm looking forward to putting it on this week.

For anyone who's interested, the axle is in amazingly clean shape. If I wasn't already locked I'd definitely pick up the axle too!

cruiseroutfit
11-06-2012, 04:18 AM
...For anyone who's interested, the axle is in amazingly clean shape. If I wasn't already locked I'd definitely pick up the axle too!

I'm still really interested, just trying to figure out a feasible way to get it from Divide to SLC.

Anyone coming this way?

Timbaworks
11-09-2012, 02:13 PM
So MTSN will be getting the rims and spare 35" next week... So they are off the table. Thanks Matt!

cruiseroutfit
11-20-2012, 10:49 PM
Thanks for the lift Tim! I'm looking forward to putting it on this week.

For anyone who's interested, the axle is in amazingly clean shape. If I wasn't already locked I'd definitely pick up the axle too!

So MTSN will be getting the rims and spare 35" next week... So they are off the table. Thanks Matt!

MTSN, any chance you can get the rear axle up to Denver at the same time? :beer: if so :D

MTSN
11-21-2012, 09:46 AM
MTSN, any chance you can get the rear axle up to Denver at the same time? :beer: if so :D

Sorry I unfortunately already grabbed all my stuff from him a couple weeks ago! Are there any members in the Colorado Springs area that may be able to help? Divide isn't far at all from the Springs...

Timbaworks
11-25-2012, 10:13 AM
MTSN, any chance you can get the rear axle up to Denver at the same time? :beer: if so :D

I will be coming to Denver at the end of next week on a fencing job. I will have the flatbed and can deliver

cruiseroutfit
11-25-2012, 10:25 AM
I will be coming to Denver at the end of next week on a fencing job. I will have the flatbed and can deliver

Right on, lets make it happen. Can you PM me your phone number?

cruiseroutfit
01-13-2013, 10:00 PM
PM sent on the rear axle. LMK if its still available.

Timbaworks
01-15-2013, 02:21 PM
Kurt, message sent

cruiseroutfit
01-29-2013, 11:20 PM
Kurt, message sent

I'm still trying to work out the transport, if I can find a way to get it to Denver and eventually SLC, I want it.

OilHammer
01-30-2013, 10:55 AM
Where are the pics on the 80 axle conversion? sounds like a fun project.