PDA

View Full Version : Drop off point for Cruiser parts needed in Denver area


cruiseroutfit
10-30-2012, 02:24 PM
Hey guys, hoping to get a stash of Cruiser parts to SLC. The seller (Alan L.) has a buddy coming out to Denver the middle of November and could bring them along. Nothing huge, a PTO winch assembly.

From there I'll need to figure a way to get them from Denver to SLC, hopefully along with the rear axle: http://www.risingsun4x4club.org/forum2/showthread.php?t=18699

Thanks guys, let me know!

rover67
10-30-2012, 02:32 PM
I have dry space to hold stuff just let me know.

In Boulder.

CardinalFJ60
10-30-2012, 03:27 PM
I'm also in Boulder County (lafayette). lemmeno if ya' need a place.

treerootCO
10-30-2012, 04:03 PM
I can store stuff for you as well (Wheat Ridge).

cruiseroutfit
10-30-2012, 07:21 PM
Awesome, thanks folks. I'll get with Alan and sort it out :cool:

wesintl
10-30-2012, 07:30 PM
i need some rims from stl lake if somone is going this way

cruiseroutfit
10-30-2012, 07:38 PM
i need some rims from stl lake if somone is going this way

Or we meet in the middle :D

Corbet
10-30-2012, 08:51 PM
Kurt, probably not much help on this one but I can generally hold some stuff in Durango if you ever have the need.

Rock Dog
10-30-2012, 11:39 PM
Kurt,
I can store the stuff in the Garage.. i am also going to SLC for Thanksgiving to see Mom...
how soon does it need to be in SLC??? will the stuff fit in the trunk of a Camry (better milage for the trip)...

Neil.

Rock Dog
10-30-2012, 11:43 PM
sorry just read the thread about the rear axle.. wont fit in the Camry that well. if the supercharger rebuild is back before thanksgiving, i can bring it in the 80... or maybe my Bro will let me borrow his Nissan Pickup for the trip to SLC.... will ask him tomorrow...

Rock Dog
10-30-2012, 11:46 PM
i need some rims from stl lake if somone is going this way

Wes, i can probably get the rims for you if you can wait until after thanksgiving for my return trip...

Neil

cruiseroutfit
10-31-2012, 10:19 AM
Kurt,
I can store the stuff in the Garage.. i am also going to SLC for Thanksgiving to see Mom...
how soon does it need to be in SLC??? will the stuff fit in the trunk of a Camry (better milage for the trip)...

Neil.

sorry just read the thread about the rear axle.. wont fit in the Camry that well. if the supercharger rebuild is back before thanksgiving, i can bring it in the 80... or maybe my Bro will let me borrow his Nissan Pickup for the trip to SLC.... will ask him tomorrow...

Thanksgiving would be absolutely fine, no rush. The PTO setup should fit in a Camry easy enough? The axle not so much :D

If your brothers truck or your 80 is an option, I would be more than happy to pay towards your fuel.

Wes, i can probably get the rims for you if you can wait until after thanksgiving for my return trip...

Neil

I could get the rims and have them here for a single parts swap location :D

nuclearlemon
10-31-2012, 11:19 AM
got plenty of room in the garage on north end of denver just off i70, but soonest i'll be going past slc will be xmas when i head to scum valley

cruiseroutfit
11-06-2012, 03:20 AM
got plenty of room in the garage on north end of denver just off i70, but soonest i'll be going past slc will be xmas when i head to scum valley

What are you driving? :D

Any chance you'll be able to fit an axle?

I'm still trying to figure out how to get the 100 Series rear axle from Divide, CO to SLC.

nuclearlemon
11-06-2012, 09:15 AM
We'll be in the 80 but not.much room for.an.axle

DaveInDenver
11-06-2012, 09:19 AM
There is a decent chance I will be in SLC this Jan/Feb timeframe (skiing). I would be driving my truck and probably would have space for an axle if it fits lengthwise in a regular length mini truck bed (e.g. 6' or shorter) and isn't filthy (I'll be sleeping in my truck). Divide is pretty far out of my way though. I'd likely be doing the north route, I-80.

cruiseroutfit
11-06-2012, 01:00 PM
There is a decent chance I will be in SLC this Jan/Feb timeframe (skiing). I would be driving my truck and probably would have space for an axle if it fits lengthwise in a regular length mini truck bed (e.g. 6' or shorter) and isn't filthy (I'll be sleeping in my truck). Divide is pretty far out of my way though. I'd likely be doing the north route, I-80.

Thanks Dave, I'm told the axle is really clean. If I can work out the Divide to Denver issue I'd be happy to get you some $$$ for the ride :D

wesintl
11-06-2012, 01:15 PM
can he get it to the springs or denver? then it'll be easy.

cruiseroutfit
11-24-2012, 04:58 PM
i need some rims from stl lake if somone is going this way

Rims are with Mr. Quigley :cool:

cruiseroutfit
11-25-2012, 09:27 AM
Bump, looks like the axle may be making its way to Denver next week:
http://risingsun4x4club.org/forum2/showthread.php?t=18699

One of you still good with a drop off?

wesintl
11-25-2012, 01:20 PM
Thx Kurt! Is is Neil bringing it in dec? If so either his place or one of u close is probably better

cruiseroutfit
11-25-2012, 02:07 PM
Thx Kurt! Is is Neil bringing it in dec? If so either his place or one of u close is probably better

He is going to try, his brother is driving out a pickup so I think it should work out.

wesintl
11-25-2012, 03:01 PM
I'm only 10 min from him 5 when at work so one of our places should be fine

cruiseroutfit
11-25-2012, 06:12 PM
Right on, thanks Wes!

BreckBJ44
11-25-2012, 09:30 PM
Kurt, I have a full garage bay in central Denver if you need it... Let me know. I am BreckenridgeCruiser on Mud and don't check my PMs here as often. I'll also be heading back to San Diego (to the I70/I15 junction) and coming back in February if you need things moved.

Kraig

cruiseroutfit
11-26-2012, 10:15 AM
Kurt, I have a full garage bay in central Denver if you need it... Let me know. I am BreckenridgeCruiser on Mud and don't check my PMs here as often. I'll also be heading back to San Diego (to the I70/I15 junction) and coming back in February if you need things moved.

Kraig

Right on, if it can't make it out with Neil in December I'll likely take you up on the I70 deal, I could buzz down there and meet you. What will you be driving?

BreckBJ44
11-28-2012, 02:04 PM
This trip will be an 80... Later in the spring I am hoping to drive the BJ(soon to be HZJ)44. I can bring an M416 if needed too.

K

cruiseroutfit
01-28-2013, 10:49 PM
Partial bump, still need to get an axle from Colorado Springs area to SLC, anyone have a trip coming up? Would be happy to pay gas money or Cruiser parts :D

CardinalFJ60
01-29-2013, 12:43 AM
pm'd ya'

cruiseroutfit
02-10-2013, 11:52 AM
Alright, the PTO winches are on their way to Denver area right now... One of you still good helping me store these for a bit, possibly til Cruise Moab if I can't find something sooner?

cruiseroutfit
02-10-2013, 03:06 PM
Alright, the PTO winches are on their way to Denver area right now... One of you still good helping me store these for a bit, possibly til Cruise Moab if I can't find something sooner?

Bump, they have arrived at Paul's place in Nederland (about 18 miles up the canyon from Boulder). He can meet in Boulder or I'd be happy to cover someones gas/time to grab them in Nederland. LMK

rover67
02-10-2013, 04:33 PM
I can run up to Ned, it's just up the road. I can also hold on to stuff until CM.

cruiseroutfit
02-10-2013, 10:25 PM
I can run up to Ned, it's just up the road. I can also hold on to stuff until CM.

Excellent, I really appreciate it Marco. I'll PM you the info.

Edit: I've PM'd you the info :D