PDA

View Full Version : WTB: ARb compressor/locker switches/lines etc.


rckhound
01-23-2014, 04:34 PM
I am in the market to get everything else that goes with my ARB lockers I picked up that were already installed in my axles. I don't have lines or anything. Looking for the CKMA12 compressor or equivalent. Let me know if anyone has these pieces and parts. Otherwise please recomend a local distributer that I could pick everything up from that supports our club or offers discounts. Would rather give a local person or business my money. Thanks, Steve.

nakman
01-23-2014, 04:50 PM
one of our primary club supporters is Slee Offroad in Golden.. they have all that stuff, and could also do the install for you. www.sleeoffroad.com

What kind of truck is this going in?

rover67
01-23-2014, 04:55 PM
you also may want to look into using the braided SS lines instead of plastic. I think i used -3 AN on mine and have been worry and leak free for a while now. Snow runs wreaked havok on the plastic lines before.

MisledYouth
01-23-2014, 05:04 PM
Bah. I've got a CKSA12 (the little guy) in the garage if anyone wants it. New in box, $75 takes it. I won't be using it. This thread actually reminded me that it's there.

rckhound
01-23-2014, 05:40 PM
If it has all the wiring and switch ill take it.

MisledYouth
01-23-2014, 05:58 PM
Deal. Message me and we can meet up. More space in the garage!

http://i1269.photobucket.com/albums/jj589/zacharyfeiler/IMG_20140123_175404_903.jpg (http://s1269.photobucket.com/user/zacharyfeiler/media/IMG_20140123_175404_903.jpg.html)

rckhound
01-24-2014, 09:18 AM
Is -3AN a brand that you used for lines? Let me know never heard of it.

DaveInDenver
01-24-2014, 09:43 AM
Is -3AN a brand that you used for lines? Let me know never heard of it.

-3AN is a fitting type. The -3 represents use on a 3/16" O.D. hose and AN a particular type, an SAE 37 degree flare normally used in aerospace. Most times it's used for brake and fuel lines when people build race cars or use braided stainless hoses. There are several manufacturers, Parker, Gates, etc. Check out Jeg's and Summit to see what they are, but you can get them lots of places. AN fittings and braided hoses are not necessary for Air Lockers, but as the saying goes, overkill never fails.

LARGEONE
01-24-2014, 08:10 PM
I just purchased 6 AN (3/8") ID braided lines for my York system from Amazon. I used the Teflon for my system due to temps, but you could likely use the cheaper rubber lines for the ARB runs. It's more expensive than the ARB blue line, but you'll only do it once!