PDA

View Full Version : 4 speed/60 axle swap


74fj40
10-01-2006, 04:31 PM
need some parts for my axle and trannsmission swap.

i need a 4 speed bellhousing with the slave mount on the driver side

and a 60 series rear long side axle shaft.

also wheres the cheapest palce to get new perches for my axles?

treerootCO
10-01-2006, 06:16 PM
You can mount the slave on either side so any 4 speed bellhousing should work. It is the mount that matters. I went backwards to a 3 speed bellhousing on my '78 and used the same mount.

Can't help you on the axles

OE dodge perches are fairly cheap. 12.00 for 4 if I remember correctly. Ask Nutley if the Dodge parts guy needs a part number.

wesintl
10-01-2006, 06:32 PM
I bought the dodge ones too. I thought they were 12 for 2...just like summit racing but that was so long ago I can't remember. I could probably look though my reciepts but that'll take a while :(

http://store.summitracing.com/egnsearch.asp?N=700+4294841030+115+400172

SROR/AKA 2BAD
10-01-2006, 11:08 PM
i'll get you the axle shaft, since i took the one you use to have.:thumb:

i have a set of mopar perches you can have.

wesintl
10-02-2006, 11:01 AM
pull and save did have a rear axle. I should have yanked the long side for you when i was there.

FJBen
10-02-2006, 03:54 PM
need some parts for my axle and trannsmission swap.

i need a 4 speed bellhousing with the slave mount on the driver side

and a 60 series rear long side axle shaft.

also wheres the cheapest palce to get new perches for my axles?


I've got some perches for an SOA on a cruiser axle, i think the dodge or equivelant axle size. $5 they are yours. or if you guys are going to pickup my 4 speed, you can just have them along with that spare clutch.

:cheers:
Ben