PDA

View Full Version : 4-speed skid plates wanted


bustanutley
03-09-2007, 10:02 AM
I need 2 or 3 skid plates that I can weld together and hopefully end up with a low profile piece that I can land on. 1 isn't doing the job.

let me know what you got

:beer:

Uncle Ben
03-09-2007, 12:21 PM
You still wont be able to land on it and it will weigh a kazillian pounds! You need to fabricate a cross bar support above the plate that will support the cruiser....not hard to do and much lighter than what your thinking of doing!

nuclearlemon
03-09-2007, 12:36 PM
you should make your own...oem really doesn't hold up well to hard core stuff. i may have one ...i'll check when i get home. i know i've got a 55 3spd plate, and at least one 40 3spd plate if those will help you out, also.

bustanutley
03-09-2007, 02:40 PM
You still wont be able to land on it and it will weigh a kazillian pounds! You need to fabricate a cross bar support above the plate that will support the cruiser....not hard to do and much lighter than what your thinking of doing!

GUh!, but its so much work! Alright I have a design in my head I guess I should put it to use, i'm going to be doing some tube work here soon anyway...

SROR/AKA 2BAD
03-09-2007, 10:21 PM
have you seen posers skid plates
i'm trying to get the link from steve.
pretty sweet work!

treerootCO
03-10-2007, 01:25 AM
http://www.mindcrater.com/Galleries-2004/Gallery_28Feb04/pages/Orange01.htm

SROR/AKA 2BAD
03-10-2007, 09:26 AM
thanx mike! :beer: