PDA

View Full Version : 2007 yard sale, everything must go!!!


treerootCO
05-25-2007, 09:42 PM
Including the kitchen sink! No seriously, I have a top o the line stainless steel sink for sale too. :D

Red is sold

The sink is a Suter D4-8 top mount stainless steel kitchen sink. Made in Switzerland, retail $500...priced to go at $100
FJ62 gas tank (proceeds go toward the raffle rig) $30
FJ40 gas tank 60s to 78 style (has a pinhole leak in the bottom) $20
Front seats $50 for the pair
FJ40 axles, axles and axles fine spline and coarse
stock springs FJ40
3 speed bell housings $20
4 speed bell housings $20
1971 FJ40 project - make offer Dan?
FJ45LV frame - $400
1970s hardtop - $100
Skid plates 3 speed - $30
4.11 complete third members - $50
One piece FJ40 hoods - $75 (2, 3, maybe 4 available)
30 gallon plastic drums - free
10 gallon plastic drums - free
2F builder engines 3 available - $75 each
4 speed tranny - $50
Desk and matching chair. The desk is 21" x 48" with a glass top - $75
14" Sony Trinitron monitor - $10
21" CRT computer monitor Nokia - $50
FJ40 cowl - make me an offer
FJ40 air cleaner assemblies old and new $10

treerootCO
05-25-2007, 09:54 PM
27" panasonic TV - free! It has issues if you leave it on for a long period of time but what do you have to lose! :)

14" Sony Trinitron CRT computer monitor - $10

Convert
05-25-2007, 10:04 PM
Got any whole 40's for sale ?

treerootCO
05-25-2007, 10:17 PM
if by whole you mean in pieces, then yes! :D

I have been thinking about selling my 71 project. The body is almost perfect.

Did you want the mustard one above? I can deliver. ;)

Beater
05-26-2007, 08:19 AM
on the sink - how deep is the right side? tia

acon40
05-26-2007, 08:54 AM
If you decide to cut up the body some let me know. I need a few parts....the inside wheel wells (where it starts to go up tbehind the seat, I only need a small section for each side) and rear floor.

Uncle Ben
05-26-2007, 09:09 AM
If you decide to cut up the body some let me know. I need a few parts....the inside wheel wells (where it starts to go up tbehind the seat, I only need a small section for each side) and rear floor.

I could use some sheet metal slices too.

art hog
05-26-2007, 10:10 AM
that 55 door has my name all over it.


Terry

treerootCO
05-26-2007, 01:05 PM
The sink is 8" on the left 6" on the right

the 55 door has been creased from opening it too far. The hinge points are remarkable solid though.

Mark out what sheet metal you would like and I'll cut it out.

UB, I'll call you on the other parts. mark out what you would like me to save.

Uncle Ben
05-26-2007, 01:46 PM
Jerry (BT) needs some door hinges!

Uncle Ben
05-26-2007, 01:48 PM
The sink is 8" on the left 6" on the right

the 55 door has been creased from opening it too far. The hinge points are remarkable solid though.

Mark out what sheet metal you would like and I'll cut it out.

UB, I'll call you on the other parts. mark out what you would like me to save.

I need some fill pieces for my rear wheel well openings to make a clean wheelbase change.

acon40
05-26-2007, 04:38 PM
Can you cut me out the floor from the tailgate to about a foot towards the front. Also, cut me out the two front parts of the wheel wheel well from the floor behind the seat to about three inches past the bend.....just cut out whats easiest for you that includes that and let me know how much and when I can pick it up.

wesintl
05-26-2007, 06:38 PM
are the floor boards good? :D

74fj40
05-26-2007, 07:54 PM
Dibs on the doors and the roll cage, if you still have them.
If green machine doesn't want the sink, we'll take that too.
Also, are the fenders rust-free ish?
And, do you have any bumperettes in good condition?

treerootCO
05-26-2007, 11:04 PM
I don't have door hinges but I do have the hinges that attach to the A pillar

I'll start cutting next week sometime.

The floors are actually in great shape.

The fenders are not rust free but fixable. No bumperettes at this time unless you feel like fixing the ones on the yellow truck.

74fj40
05-26-2007, 11:15 PM
Mike - I think I'll pass on the fenders - think I'll try to fix the ones I have.
Still interested in the doors, the roll cage and the sink though.

Do you have the hood ornament for an early 40, and a set of reasonable spring pins?

Thanks, Rob




I don't have door hinges but I do have the hinges that attach to the A pillar

I'll start cutting next week sometime.

The floors are actually in great shape.

The fenders are not rust free but fixable. No bumperettes at this time unless you feel like fixing the ones on the yellow truck.

treerootCO
05-26-2007, 11:21 PM
Mike - I think I'll pass on the fenders - think I'll try to fix the ones I have.
Still interested in the doors, the roll cage and the sink though.

Do you have the hood ornament for an early 40, and a set of reasonable spring pins?

Thanks, Rob
I don't have any extra ornaments available yet. I assume you need the pins that anchor the ends of the springs to the frame? I have two of those in the frame I cut in half the other day.

74fj40
05-26-2007, 11:30 PM
Yep - the pins that anchor the springs to the frame.

I don't have any extra ornaments available yet. I assume you need the pins that anchor the ends of the springs to the frame? I have two of those in the frame I cut in half the other day.

acon40
05-27-2007, 08:45 AM
great.....LET me know when you chop that bad boy up so I can pick up those parts.

74fj40
05-27-2007, 09:01 AM
not sure if it's part of what someone else wants or not, but if this area is still available when you're cutting, I really do need it......

acon40
05-27-2007, 11:55 AM
Here are the parts I need.....

Both parts of this section of the wheel well....if it makes sense....
http://im1.shutterfly.com/procserv/47b7db06b3127cce855d24f5a8bf00000026100QcOGThwybMY

http://im1.shutterfly.com/procserv/47b7db06b3127cce855d24f9a8b300000026100QcOGThwybMY

the floor from the back to where the read bar is.....

http://im1.shutterfly.com/procserv/47b7db06b3127cce855d2746e89500000026100QcOGThwybMY

And this rocker end corner if yours is not bent up but I think it may be or the center section where you see the crappy repair work from the po.....

http://im1.shutterfly.com/procserv/47b7db06b3127cce855d21a8694800000026100QcOGThwybMY

MDH33
05-27-2007, 03:01 PM
From my other thread - I'm still looking for a site glass for a single barrel Aisan SD-40 and also the intake/exhaust manifold combo for the '66 FJ40.

I could use some spare course spline birfs and axles for my '73 FJ40 too.

:thumb:

Convert
05-27-2007, 08:39 PM
if by whole you mean in pieces, then yes! :D

I have been thinking about selling my 71 project. The body is almost perfect.

Did you want the mustard one above? I can deliver. ;)

If you decide to sell the 71 project let's talk,I may be interested

acon40
05-27-2007, 10:03 PM
Forgot, I need the rear window for the hardtop for my 66, the window on the pass side that curves....

treerootCO
05-28-2007, 09:11 AM
Martin pointed out that the 66 windows are smaller than the later style ones. I have an extra later style one 74 and up.

acon40
05-28-2007, 09:24 AM
Not a big deal, might just run a soft top 24/7 anyway. How are those pictures I posted for you....did you get a good idea of what I needed?

treerootCO
05-28-2007, 11:25 AM
PM your phone number and I call you when it comes time to cut.

I wish I had concrete. I wonder why my back hurts:(

acon40
05-28-2007, 05:57 PM
omg I need that back window from the blue one :)....hahaha anyway, look for the pm.

treerootCO
05-28-2007, 06:28 PM
I have two extras sets :)

acon40
05-28-2007, 06:41 PM
hahaa nevermind, not going to keep the top I decided.

treerootCO
05-28-2007, 10:54 PM
updated master list on page 1

acon40
05-29-2007, 07:40 AM
How much for the 2f itself, I might get that from you too......this is different then the one in the 66 right? or is it?

treerootCO
05-29-2007, 10:31 AM
I sold the engine/tranny/transfer to Tim; however, I have 3 other 2F engines if you are interested in one. The 2F is a newer version of the F135 that came in your 40.

treerootCO
05-29-2007, 10:47 AM
new items added...

Shark Bait
05-29-2007, 10:50 AM
Mike, I'll take a 4-speed skid plate. Will it fit my '69 frame? Can you bring it to the meeting next Wednesday?

MDH33
05-29-2007, 10:52 AM
Mike, You still have me down for the hard top, I hope. Also might be interested in a pair of doors. Let me know when you'll be around and I'll make some time to come over and pull parts.

:thumb:

treerootCO
05-29-2007, 11:04 AM
4 speed plate saved for Hatfield.

Ige helped me stage the top over to the gate. I'll be home this afternoon if you wanted to come by.

nakman
05-29-2007, 11:28 AM
Are those 40 fenders better off than the ones I've currently got?

and if I were to buy the '71, can I keep it at your house?

Red_Chili
05-29-2007, 12:18 PM
Yabut, why is Mike selling his personal stash? Hmmmmmmmm?

treerootCO
05-29-2007, 12:45 PM
absolutely no storage available sorry. Nakman, look at the rear quarters on page one. Do you want those to repair yours? UB has dibs on the rear sections for now though. Fenders are about the same condition as yours unless you buy the 71. Those fenders are perfect;)


new item added:
1970s desk and chair. Pics tonight....

wesintl
05-29-2007, 01:10 PM
I'll take rear corners if nak doesn't... you've seen the ones on the 64. Or should I say you haven't :lmao:

74fj40
05-29-2007, 01:16 PM
damn - you posted more stuff.....

I'll take the "Darn near perfect FJ40 fiberglass hardtop cap - $75"

Also, I need one in the dash windshield hold down screw in thingy if you've got one.....

And.....do you think a 4spd skid plate would fit into a 40 witth a 60 4sp tranny/transfer conversion?
If so, and you still have one, we'll take that too.

CardinalFJ60
05-29-2007, 01:32 PM
:D second in line for the 4spd. skid plate if you've only got one (for my '77-40).

Uncle Ben
05-29-2007, 01:46 PM
absolutely no storage available sorry. Nakman, look at the rear quarters on page one. Do you want those to repair yours? UB has dibs on the rear sections for now though. Fenders are about the same condition as yours unless you buy the 71. Those fenders are perfect;)


new item added:
1970s desk and chair. Pics tonight....

Let Nak take what he needs. I can cut up an old hood if need be for the metal I need. I have plenty of work and geometry to get done before I learn what I will need for wheel openings.....

nakman
05-29-2007, 02:04 PM
Ok I'm out, I thought you had revealed some top secret front fenders for some reason. I can't get into a tub project right now, so Wes & UB you guys duke it out.

I may swing by anyway, just to see what else you got that I don't really need.. ;)

treerootCO
05-29-2007, 02:38 PM
I'll be home tonight

treerootCO
05-29-2007, 07:54 PM
Desk and matching chair. The desk is 21" x 48" with a glass top - $75

14" Sony Trinitron monitor - $20

27" Panasonic TV - free because it used to turn off if left on for 6+ hours

Uncle Ben
05-29-2007, 08:00 PM
My daughter Amy will take the TV, if thats OK? ;)

nuclearlemon
05-29-2007, 10:35 PM
i think amy needs a desk and a chair also. how about some tile? maybe some old fence slats?





signed,
treeroot's top saleswoman and mysterious cleaner of junk

not to be confused with his keybitch...that would be ian.

nakman
05-29-2007, 10:52 PM
Ige can I park the '71 at your house? :)

nuclearlemon
05-29-2007, 10:57 PM
Ige can I park the '71 at your house? :)

do i get to keep it? :D

74fj40
05-30-2007, 07:25 AM
Hey - stop trying to sell my tile....
i think amy needs a desk and a chair also. how about some tile? maybe some old fence slats?





signed,
treeroot's top saleswoman and mysterious cleaner of junk

not to be confused with his keybitch...that would be ian.

nuclearlemon
05-30-2007, 09:01 AM
Hey - stop trying to sell my tile....

don't worry, i'm not pitching the slate, i'm pitching the tile that's in the backyard ;)

treerootCO
05-30-2007, 10:28 AM
updated list on page 1

acon40
05-30-2007, 01:57 PM
Any update when i may be able to pick up the panels? Also, do you have non-rusted barn doors for my 66?

treerootCO
05-30-2007, 04:17 PM
Already started cutting last Monday. I have the bifold upper doors for the 66 style hardtop available. I do not have any extra half doors for the rear. Soon I'll have ambulance doors available.

Uncle Ben
05-30-2007, 04:30 PM
Already started cutting last Monday. I have the bifold upper doors for the 66 style hardtop available. I do not have any extra half doors for the rear. Soon I'll have ambulance doors available.

I have an air nibbler if you need it...

gahi
05-30-2007, 06:49 PM
JD2 Bender with Dies
http://denver.craigslist.org/tls/341011817.html

treerootCO
05-30-2007, 09:40 PM
Anyone need a new PC?
Denon DVD player?
57" rear projection?
VCR?

Hulk
05-30-2007, 10:38 PM
How old is the DVD player?

Shark Bait
05-30-2007, 11:01 PM
Mike,

What does the slate look like? :D

treerootCO
05-31-2007, 08:30 AM
I meant to grab the model number this morning. It is a Denon with progressive scan. New enough that it plays most formats like .mpg, .avi, etc. but not new enough to play both PAL and NTSC. I would guess 4? years old.

The slate is 16x16" gauged slate. The colors vary from reds to yellows to greens. The prominent colors are grey/greens. Rob is interested in it but I haven't determined a fair price yet. I think I know what I paid fr it but I wanted to find the receipt to make sure I didn't price it too high. Everything I am selling at the 2007 yard sale is less than I paid for it.

Is anyone interested in some old steamers trunks? I have 3 of them.

treerootCO
05-31-2007, 04:26 PM
I am cutting more 40 parts off tonight after work.

acon40
05-31-2007, 05:36 PM
Thats what I like to hear.....as long as its not from my cruiser hahaha.

treerootCO
06-02-2007, 08:49 PM
I have another FJ40 Hardtop in fair condition for sale. $100
FJ40 front axle housings 6 to choose from
FJ40 rear housings 4 or so to choose from
stock FJ40 springs
T-case top covers and side covers

treerootCO
06-03-2007, 09:51 AM
The slate is most likely sold to Rob.

treerootCO
06-03-2007, 05:05 PM
I'll be home the rest of the afternoon. If anyone wants parts, come and get them. acon40, your parts are ready. The sooner the better, so let me know. I would like to take a load to the scrap yard Monday. Martin, your top is ready to go.

MDH33
06-03-2007, 08:00 PM
Cool, I still need the top but but I have no way of moving it over here. Can I borrow your trailer for an hour? Otherwise I have to wait until the 66 is capable of moving under it's own power. Still waiting on carb parts to arrive from CA.

Interested in looking at the seats too. and some doors. and your 71 project. :)

acon40
06-03-2007, 10:26 PM
PM me with where to pick these parts up from, a phone number, and the cost roughly....?

treerootCO
06-04-2007, 09:14 AM
PM sent

treerootCO
06-04-2007, 06:32 PM
pics for acon40 and more pics of the yard sale goodies. FJ40 cowl perfect for a buggy. Shorty jump seats, and anything you see in the last pic is for sale. Make me an offer.

acon40
06-04-2007, 08:30 PM
Perfect, thanks so much.

Shark Bait
06-04-2007, 09:23 PM
Mike,

I should have asked you, do you have any "upper" front floor sections in OK shape? I have a hole in my DS floor near the clutch pedal. Probably no more than a square foot would be what I'd need.

acon40
06-04-2007, 10:15 PM
Also, I don't know if I asked or not, do you have a drop tailgate? If so and its in good shape I might want that too.

treerootCO
06-05-2007, 12:37 AM
Mike,

I should have asked you, do you have any "upper" front floor sections in OK shape? I have a hole in my DS floor near the clutch pedal. Probably no more than a square foot would be what I'd need.

the driver's side is missing the firewall. What part did you need?


Also, I don't know if I asked or not, do you have a drop tailgate? If so and its in good shape I might want that too.

Sorry, I sold all the tailgates I had.

Shark Bait
06-05-2007, 12:46 AM
the driver's side is missing the firewall. What part did you need?


The part that angles up to the firewall from the DS floor pan. No big thing if you don't have any.

Kipper
06-05-2007, 10:32 AM
I"ll take those two mustard chunks for the front halves of the wheel wells and a few other patch pieces for my project, if no one else wants them.

treerootCO
06-06-2007, 12:21 PM
The mustard parts will be picked up by Acon40 Thursday.

Who needs me to bring parts to the meeting?

Max and Rob - FJ40 hardtop cap and 4 speed skid plate
Hatfield - 4 speed skid plate

acon40
06-06-2007, 12:50 PM
I will be coming by Thursday around 6 to 6:30 depending on traffic.

acon40
06-10-2007, 10:00 AM
Need to bug you again, do you have the white par that goes on the grille (not sure what its called, but it's the trim piece that goes in the center....the headlights mount into it.....goes the width of the grille. Sorry for not knowing the name hahaha.

Shark Bait
06-10-2007, 12:43 PM
Need to bug you again, do you have the white par that goes on the grille (not sure what its called, but it's the trim piece that goes in the center....the headlights mount into it.....goes the width of the grille. Sorry for not knowing the name hahaha.

Bezel. All of Mike's aren't the upside down kind. :lmao:

acon40
06-10-2007, 12:53 PM
hahahaha, thanks.

lfd270ben
06-13-2007, 04:50 AM
oops

treerootCO
06-14-2007, 11:10 AM
3,000 pounds of scrap went to the recyclers. Here is an updated list:

Including the kitchen sink! No seriously, I have a top o the line stainless steel sink for sale too. :D

Red is sold

The sink is a Suter D4-8 top mount stainless steel kitchen sink. Made in Switzerland, retail $500...priced to go at $100
FJ62 gas tank (proceeds go toward the raffle rig) $30
FJ40 gas tank 60s to 78 style (has a pinhole leak in the bottom) $20
Front seats $50 for the pair
FJ40 axles, axles and axles fine spline and coarse
stock springs FJ40
3 speed bell housings $20
4 speed bell housings $20
1971 FJ40 project - make offer Dan?
FJ45LV frame - $400
1970s hardtop - $100
Skid plates 3 speed - $30
4.11 complete third members - $50
One piece FJ40 hoods - $75 (2, 3, maybe 4 available)
30 gallon plastic drums - free
10 gallon plastic drums - free
2F builder engines 3 available - $75 each
4 speed tranny - $50
Desk and matching chair. The desk is 21" x 48" with a glass top - $75
14" Sony Trinitron monitor - $10
21" CRT computer monitor Nokia - $50
FJ40 cowl - make me an offer
FJ40 air cleaner assemblies old and new $10

Maddmatt
06-14-2007, 12:39 PM
Mike,
What condition is that sink in? Been mounted, lots of caulk hanging off and scratches, or new in the box? Somewhere in between? If it looks pretty and new, I'm pretty interested. Let me know.
-Matt

treerootCO
06-14-2007, 01:44 PM
never been installed, still has the plastic on it, some very fine scratches...the hardware bag got wet so the screws are rusty.

nuclearlemon
06-14-2007, 01:54 PM
i'll trade you the hood off grampa for one of your split hoods. grampa was a hardtop and didnt have the hardware for dropping the windshield and i hate to drill into a hood that doesn't have the holes for the windshield catches and pads

treerootCO
06-14-2007, 02:01 PM
i'll trade you the hood off grampa for one of your split hoods. grampa was a hardtop and didnt have the hardware for dropping the windshield and i hate to drill into a hood that doesn't have the holes for the windshield catches and pads

sounds good to me

Hulk
06-14-2007, 11:46 PM
Mike, will the 4.11s work in my 1981 FJ40? If so, I'm probably interested in 2 third members. I need to retire my 3.73s so I can crawl a little slower.

Maddmatt
06-15-2007, 08:25 AM
never been installed, still has the plastic on it, some very fine scratches...the hardware bag got wet so the screws are rusty.

Sorry Mike, I have to pass on the sink. I measured and my current sink ugly, dinged, gross sink is bigger (accordeing to the Suter website) so a great deal on a cool sink started to look like it was going to be a whole new kitchen (new sink leads to new counters leads to new cabinets leads to new floors.......) and I don't have the budget. Bump for a great deal on a cool sink though.
-Matt

(`._.[xtr3m3]._.)
06-15-2007, 11:20 AM
Mike, will the 4.11s work in my 1981 FJ40? If so, I'm probably interested in 2 third members. I need to retire my 3.73s so I can crawl a little slower.


I would also be interested in 2 4.11 thirds if they would work in my 79.

treerootCO
06-15-2007, 11:30 AM
Let me look and see how many 4:11 sets I have....

They should be a direct swap for 3:73s if you swap out the drive flange to match your driveshafts. Fine spline pinion vs coarse spline pinion though.

treerootCO
07-11-2007, 12:27 PM
back ttt

Fire sale part II:

No reasonable offer refused. Everything from parts to complete vehicles. Tools, household items, electronics, clothing, firewood, kitchen cabinets (great for a garage), curios, etc...
Does anyone need a title for an 83 FJ60? Free to a good home

Shark Bait
07-11-2007, 12:38 PM
I take it you're moving?

treerootCO
07-11-2007, 12:42 PM
I have to:(

I do not deal well with corrupt governments or people that abuse their power.

acon40
07-11-2007, 12:43 PM
What tools and by chance no cd player for a car huh?

treerootCO
07-11-2007, 12:47 PM
I have a nice tool chest 2 tier and a box of misc tools from the 50s. Sorry no pics. I'll give you a pile of head units, if one of them works then great.

acon40
07-11-2007, 12:49 PM
How much for the chest...>How tall is it? Wheels?

treerootCO
07-11-2007, 12:53 PM
red, wheels, about 4', make me an offer

acon40
07-11-2007, 12:55 PM
I have no clue what those even go for to be honest...

74fj40
07-11-2007, 01:04 PM
I know it's a long shot, but do you have any slate tile?

When are you gonna move? We'll be available to help.

back ttt

Fire sale part II:

No reasonable offer refused. Everything from parts to complete vehicles. Tools, household items, electronics, clothing, firewood, kitchen cabinets (great for a garage), curios, etc...
Does anyone need a title for an 83 FJ60? Free to a good home

Romer
07-11-2007, 02:00 PM
Do you have oone of those small refrigerators 1 to 2 cubic feet?

Three Wheel Ben
07-11-2007, 02:04 PM
Do you have oone of those small refrigerators 1 to 2 cubic feet?

Romer, I've got one if he doesn't I'd like to part with.

Root - might be interested in the cabinetry. Talk tonight:D

treerootCO
07-12-2007, 05:51 PM
ttt

acon40
07-12-2007, 07:47 PM
Never heard back on a price for the chest, have you come up with one? Not knowing what it is I don't know what to offer. Readdy to pull the trigger on it.

MDH33
07-12-2007, 08:19 PM
Mike, are you selling your lpb?

Rezarf
07-12-2007, 09:38 PM
Mike-

How much for a set of front fine spline axles for spares for my 76 fj40.

Also, how long has the tranny been upside down?

Thanks!

Drew

treerootCO
07-13-2007, 10:24 AM
I gave away the tool chest last night. Free was the only way it found a new home. (I saved the side compartment for you ige) Transmissions are all over, 5 to choose from. I turned it over to keep water out. We will have to find a set of axles for you. There are probably some back there, I just don't know where yet.

acon40
07-13-2007, 05:16 PM
You don't have anym more tool chest do you? I am need of one bad.

treerootCO
07-13-2007, 05:56 PM
Nope, they all went yesterday. Do you want your 40 back?

acon40
07-13-2007, 08:51 PM
Sorry man, no cash on me right now....this month is hard on the budget.

Three Wheel Ben
07-13-2007, 09:12 PM
Hey, don't be giving away that 40 until I look at it. Saw the pics. I might just take it home so chill. I might store it for you anyway:D

Nope, they all went yesterday. Do you want your 40 back?

treerootCO
07-14-2007, 12:02 AM
the 40 has been sold...to Ben that is:)

acon40
07-14-2007, 08:14 AM
Good score....

Convert
07-15-2007, 06:00 PM
Still Got Mine ? I will call you tomorrow and get it out of there in the evening:thumb: