PDA

View Full Version : jenny creek kiosk work day


Beater
06-27-2007, 07:58 AM
ok, so I think my life is back to normal now, so back to the grind. Literally.

We have to complete a kiosk for the jenny creek trail head. I have almost all the materials.

I would like to have a work day this sunday if possible. I will need 2~3 bodies. You don't have to be a certified welder or anything like that. I will most likely be "sticking" the kiosk, due to the ridiculously thick material the rangers bought.

We need people to clean, sand, grind, and cut material. Must be able to measure twice and cut once. We will not be putting it together, only cutting the pieces and prepping for welding.

I also need about 4 feet of 1/2" cold or hot rolled round bar, and 4 feet of 1/2" id tube/pipe, either schd 40 or 80, or .125 wall.

I have all tools needed, providing the big arse sign post material will fit in my band saw. If not, we will torch it and clean the cuts.

WE WILL NEED THE FOLLOWING:
Beverages
1 gal acetone
4.5 flap wheels 80 and 120 grit. HF wheels need not apply


BYOG (bring your own gloves)

call w/questions 3oh3 9oh6 8693

Red_Chili
06-27-2007, 08:35 AM
I'm in, for at least part of the day - I will bring barley pop.

Beater
06-28-2007, 12:10 PM
Bump!!!!!

subzali
06-28-2007, 05:20 PM
Is this at your place John? I'll try to be back in town Sunday midday, but not sure yet.

Beater
06-28-2007, 05:51 PM
yes - 12 to 4

Hants
06-29-2007, 08:59 AM
I got a hall pass. Starts at 1pm, though, so I wouldn't get up there until about 2. Is that too late?

Corbet
06-29-2007, 05:57 PM
Where and when exactly? I might be able to make it? Wife works this Sunday so I am free, kind of..., long honey do list still pending.

Beater
06-29-2007, 07:59 PM
THIS SUNDAY the 1st

Red_Chili
06-30-2007, 08:03 AM
Where and when exactly? I might be able to make it? Wife works this Sunday so I am free, kind of..., long honey do list still pending.
John's place, just north of 6th and Colorado, on Colorado on the east side. Access via the alley. Just south of a Methodist church - see ya there!

Corbet
06-30-2007, 11:40 AM
exact address so I can mapquest it. Thanks, I try to make it.

Beater
06-30-2007, 03:49 PM
640 colorado blvd.

Beater
07-01-2007, 12:10 PM
it's on - bring your sunscreen!

Corbet
07-01-2007, 02:59 PM
I just finished the honey do list, not going to make it down this time, sorry.

Red_Chili
07-01-2007, 08:55 PM
Well, SeldomSeen and Hants showed up and brightened our day! We got most of the kiosk built, with only a few errors, no injuries, and only a moderate amount of suds consumed.

We even managed to engineer a strategy for getting the big thing in the ground without having it fall down. And even agreed on it. With apologies to Guinness, BRILLIANT!

In a couple weeks we will be finishing the kiosk, and then we will be ready to install it in the location chosen by the rangers. With some media attention if all plans hold! So plan on a nice relaxing overnighter up by Yankee Doodle, with a few holes punched, a center post installed and cured overnight, and the remainder installed on a Saturday morning with not a whole lot of labor time.

Shark Bait
07-01-2007, 08:58 PM
With some media attention if all plans hold!

Bill,

I'll be happy to try and distribute a press release again. ;)