PDA

View Full Version : Eagle Alloy Wheels 15x8 modified (4)


Red_Chili
08-31-2007, 07:38 AM
I have some decent Eagle Alloy wheels for sale. Some rock rash, but with some light sanding on the edges, then polishing, you might be very pleased with how they shine up.

Note that I relocated the valve stem to protect it from rocks. I should have done this many years ago; it worked exceptionally well. The reason I did it was nearly being stranded at the end of a creek in the middle of nowhere in Canyonlands, Needles District. Damaging a valve stem on a rock in such a situation is not something you want to do in the desert at 6PM.

$30/each. I only have four, the fifth was damaged in the rollover.
I do know where you can get a near match for a spare for about $75 though, if interested.

303-nine oh six - one three five nine (cell) or PM. Downtown Littleton area.

Beater
09-02-2007, 03:22 PM
I remember that day in the needles...

I would take them if they were 16...

Red_Chili
09-07-2007, 10:35 AM
Price drop, $25/each.

hykerwilson
09-09-2007, 03:17 PM
Hello,

Do you know if the offset is fine and dandy for a 93 4 runner? and what is the width?

on a side note, where does one get a set of 33 x 9.50 tires? I have been looking around. I am not sure if I want to get Super Swampers though...

hykerwilson@gmail.com
Hyker Wilson

Red_Chili
09-10-2007, 06:27 AM
Yep, I originally had them on a 1990 4Runner (Red Chili 1). They add a bit of track width, which is good. 3.5" backspace. They are 15x8 wheels.

33x9.50 might be a bit tough anymore, I think BFG used to make them but am not sure if they are still available from them. 33x10.50s are though, and I have a set on my Taco that work just dandy. They would fit very well on these wheels.

Red_Chili
09-10-2007, 08:27 AM
The pinch seam mod is easy to do, and fairly standard as a first mod on minis. Big Friendly Hammer is your tool of choice. Don't be overly enthusiastic on the ECM side, but then, that would take some serious whacking. Thanks for the tire info, Dave!

Red_Chili
09-13-2007, 07:20 AM
Nobody needs inexpensive but good alloy wheels, 6 on 5.5, 3.5" backspace?
I've heard from a couple folks, one guy seemed certain to buy them but he never called back.

PabloCruise
09-16-2007, 05:28 PM
I believe 3.5 is correct for Cruisers, correct?

If so, I'll buy them; 4 for $100

Is there any rubber on them? I need to find a set of 31's for the Piggy.

Thanks Bill!

Red_Chili
09-17-2007, 07:05 AM
Sorry, already sold to Hyker Wilson- no rubber on them! Thanks for the interest.

PabloCruise
09-17-2007, 08:10 PM
Bummer!