PDA

View Full Version : Where'd you put it


chilitoy
05-17-2008, 12:44 PM
I am about to install a Hy-Steer kit on my 82 p/u and was trying to find measurements on the placement of the IFS power steering box. I know I have to fab a bracket, drill holes,and weld all that stuff on. I was going to start by putting the box on the steering shaftand seeing how everything lines up, but I wanted to see if there is any specs. The only info I have been able to find on placing the box is to make sure the tie rod and drag link are as parallell as possible. So if anyone has installed the kit on a straight a straight axle (not a sas) and could shoot me a measurement, it would greatly be appreciated. Thanx.