PDA

View Full Version : Free Parts


kvanoort
09-12-2008, 02:58 PM
I HAVE UPDATED THIS POSTING TO IDENTIFY THE PARTS THAT PEOPLE HAVE DIBS ON. Last Updated on 9-16-08

I'm cleaning out the garage today and realize I don't have enough room to keep all the FJ40 parts I've accumulated. So if anybody wants to come get any or all of this stuff, here's what I have:

USED PARTS
1974 F block - good candidate for a rebuild - It's a transition motor ('74 1/2) with the oil filter on the block.
3 cylinder heads
2 oil pans - [Rogue Leader]
1 F crank
5 F pistons and connecting rods
lifters
F side cover
2F side cover sandblasted and painted (like new) - [Ige]
F valve covers
2 radiators
F metal fan
'72 gas tank (has a few pin holes from rust on bottom)
3 distributors
F motor mounts
2F intake and exhaust manifold - [Ige]
2F air rail
crank pulleys
head bolts
3 speed clutch & pressure plate - used but in good condition
4 speed clutch & pressure plate - used but in good condition
2F oil pump
starter
FJ60 ignition coil
'72 OEM air filter - still good I think
2 - Goodyear Wrangler AT/S tires P235/75R15 - I was holding onto them as spares

NEW PARTS
2F set of Clevite bearings - .25mm
ITM oil pump
4 - 25mm freeze plugs
2 - 24mm freeze plugs
5 - 50mm freeze plugs
2F set of Dura-bond cam bearings
2F set of Clevite main bearings - .25mm
2F ITM Engine Gasket kit - If you're rebuilding a 2F and don't mind aftermarket parts this stuff is for you. - [Jeff Zepp]
2F OEM exhaust gasket - [Ige]
2F OEM side cover gasket - [Ige]
'72 OEM fuel filter

You get the idea - lots of stuff that I think is worth keeping but I just don't have the room for it all in my garage.

It would be great if someone could stockpile the parts for club members as I'm sure these parts are going to be harder and harder to find in the future.

Kent

Rogue Leader
09-12-2008, 04:00 PM
Will a 2f exhaust manifold fit onto a F1.5? If so I would gladly take that off your hands. Also what years are your Distributors?

kvanoort
09-12-2008, 04:08 PM
Will a 2f exhaust manifold fit onto a F1.5? If so I would gladly take that off your hands. Also what years are your Distributors?

The manifold studs on a 2F are larger than on the F. One of the distributors is off a '75 2F, the other is off a '72 F and the other is unknown to me.

Rogue Leader
09-12-2008, 04:28 PM
dang, how bout your oil pans? Negatory on the dist. looking for a vac advance. If the parts are taking up too much room and need to be gone soon I can store the whole lot.

kvanoort
09-12-2008, 04:34 PM
dang, how bout your oil pans? Negatory on the dist. looking for a vac advance. If the parts are taking up too much room and need to be gone soon I can store the whole lot.

Come and get it. I'll PM you my address.

Rogue Leader
09-12-2008, 04:53 PM
K I just cant take some of the bigger stuff. All I have working big enough is a Jeep Wrangler. A lot of the engine parts I could use cause im rebuilding my F1.5 and they would fit in my storage space better.

kvanoort
09-12-2008, 05:01 PM
K I just cant take some of the bigger stuff. All I have working big enough is a Jeep Wrangler. A lot of the engine parts I could use cause im rebuilding my F1.5 and they would fit in my storage space better.

Please quote the listing of parts and identify what you'll be taking so that people know what's still up for grabs. Thanks.

Rogue Leader
09-12-2008, 05:07 PM
Here is a list of the parts I can store for the club. I don't know what I will be needing but can edit the list as I use parts.

USED PARTS
1 cylinder heads
2 oil pans
1 F crank
5 F pistons and connecting rods
lifters
F side cover
2F side cover sandblasted and painted (like new)
F valve covers
3 distributors
F motor mounts
2F intake and exhaust manifold
2F air rail
crank pulleys
head bolts
4 speed clutch & pressure plate - used but in good condition
2F oil pump
starter
FJ60 ignition coil
'72 OEM air filter - still good I think

NEW PARTS
2F set of Clevite bearings - .25mm
ITM oil pump
4 - 25mm freeze plugs
2 - 24mm freeze plugs
5 - 50mm freeze plugs
2F set of Dura-bond cam bearings
2F set of Clevite main bearings - .25mm
2F ITM Engine Gasket kit - If you're rebuilding a 2F and don't mind aftermarket parts this stuff is for you.
2F OEM exhaust gasket
2F OEM side cover gasket
'72 OEM fuel filter

I just cant fit radiators and engine blocks in our crawl space. I can make up some kind of excel Spreadsheet and post it up with parts available and inventory them.

nuclearlemon
09-12-2008, 05:23 PM
can i get the 2f side cover gasket and side cover?

anyone know what sizes the f and 2f exhaust manifold studs are? i can't remember all the po said about motor and the manifolds i've got...i'm thinking, the extra manifold set i have are f (intake and exhaust) and that he put a 2f into the pig. if so, i'll take the 2f set and exhaust gasket from you and rogue leader can have my f setup.

Rogue Leader
09-12-2008, 05:34 PM
Ige, i only need your exhaust Manifold but would be happy to take the intake off of your hands.

kvanoort
09-12-2008, 05:53 PM
Add a slightly used OEM 2F manifold gasket to the list - less than 150 miles on the gasket.

timmbuck2
09-12-2008, 05:56 PM
I can't use anything now, but can store it all in my storage unit for the club...

kvanoort
09-12-2008, 06:37 PM
Add a pair of front helper leafs to the list. These were used when the FJ40 was saddled with a snowplow.

Rzeppa
09-14-2008, 12:40 PM
Hi Kent, I'll be glad to take the engine gasket kit. I have two 2Fs and one F on stands in my garage and plan to build one good engine from them. Thanks and happy cruisin'!

Air Randy
09-14-2008, 02:35 PM
dang, how bout your oil pans? Negatory on the dist. looking for a vac advance. If the parts are taking up too much room and need to be gone soon I can store the whole lot.

Rogue leader - What type of distributor are you looking for? I have the stock vacuum advance distributor out of my 74 F engine along with the coil & ignitor. It was running OK with it when I took it out and put in an HEI unit.

kvanoort
09-14-2008, 04:52 PM
Here is a list of the parts I can store for the club. I don't know what I will be needing but can edit the list as I use parts.

USED PARTS
1 cylinder heads
2 oil pans
1 F crank
5 F pistons and connecting rods
lifters
F side cover
2F side cover sandblasted and painted (like new)
F valve covers
3 distributors
F motor mounts
2F intake and exhaust manifold
2F air rail
crank pulleys
head bolts
4 speed clutch & pressure plate - used but in good condition
2F oil pump
starter
FJ60 ignition coil
'72 OEM air filter - still good I think

NEW PARTS
2F set of Clevite bearings - .25mm
ITM oil pump
4 - 25mm freeze plugs
2 - 24mm freeze plugs
5 - 50mm freeze plugs
2F set of Dura-bond cam bearings
2F set of Clevite main bearings - .25mm
2F ITM Engine Gasket kit - If you're rebuilding a 2F and don't mind aftermarket parts this stuff is for you.
2F OEM exhaust gasket
2F OEM side cover gasket
'72 OEM fuel filter

I just cant fit radiators and engine blocks in our crawl space. I can make up some kind of excel Spreadsheet and post it up with parts available and inventory them.

Rogue Leader - This is starting to get messy.

You were first to post that you wanted everything but the big stuff so you have first dibs but you need to come and get the parts within the next few days. Otherwise, go back to the list and identify the items that you really need so that others can get what they need. As soon as the dust settles, We'll have Tim come and get what is left over and put it in his storage unit. I need it all out of my garage by Friday.

Thanks.
Kent

nuclearlemon
09-14-2008, 08:23 PM
Rogue Leader - This is starting to get messy.

You were first to post that you wanted everything but the big stuff so you have first dibs but you need to come and get the parts within the next few days. Otherwise, go back to the list and identify the items that you really need so that others can get what they need. As soon as the dust settles, We'll have Tim come and get what is left over and put it in his storage unit. I need it all out of my garage by Friday.

Thanks.
Kent

kent, if you check the first sentence he's just offering to store the parts. all he really needs is an oil pan. i also forwarded a pm from him stating the same.

ige

Rogue Leader
09-15-2008, 03:49 PM
Sorry for messing everything up. Ige is right I only needed the oil pan but was offering to store the smaller items in some extra space that I have. It sounds like Tim has a better solution to the storage issue. Mtn Trucker i wanted to upgrade my stock 74 distributor to a vacuum advance from a 60 or later 2F.

kvanoort
09-15-2008, 09:49 PM
Sorry for messing everything up. Ige is right I only needed the oil pan but was offering to store the smaller items in some extra space that I have. It sounds like Tim has a better solution to the storage issue. Mtn Trucker i wanted to upgrade my stock 74 distributor to a vacuum advance from a 60 or later 2F.

Not a problem. I understand.

Rogue Leader - I'll go ahead and set the oil pans aside for you.

Ige - The side cover and gasket are yours.

Jeff - The 2F gasket kit is yours. Do you still have a good stock 40 front left leaf spring laying around that you could part with?

Tim - Are you still willing to store the rest of the parts?

I'll go back and edit the original post so that people know what's still available.

Thanks.
Kent

Rzeppa
09-15-2008, 10:44 PM
Jeff - The 2F gasket kit is yours. Do you still have a good stock 40 front left leaf spring laying around that you could part with?


I do, but I wouldn't call it "good", just serviceable. BTW, there is no left or right, they are just front and back. Fronts are 7 leaves, back are 6. Thanks and happy cruisin'!

nuclearlemon
09-15-2008, 11:15 PM
Not a problem. I understand.

Rogue Leader - I'll go ahead and set the oil pans aside for you.

Ige - The side cover and gasket are yours.

Jeff - The 2F gasket kit is yours. Do you still have a good stock 40 front left leaf spring laying around that you could part with?

Tim - Are you still willing to store the rest of the parts?

I'll go back and edit the original post so that people know what's still available.

Thanks.
Kent

no problem. i'm also going to grab the manifolds and gasket from you if they're still available and then rogue leader is going to take mine since he needs f, which i've got and i need 2f which you've got. clear as mud;)

pm me your addy and when a good time to grab the stuff is. i can come out any time after 6:30 tues-thurs, or anytime fri-sun. if it's before this weekend, i can also get the pans for rogue leader since he's coming to my place to get my manifolds then.

thanks a bunch
ige

kvanoort
09-20-2008, 12:10 PM
Anybody need anything?

Timmbuck2 - Are you still willing to store the parts for the club?

trucruiser
09-29-2008, 12:06 PM
Do you have any 2F push rods?

kvanoort
09-29-2008, 09:54 PM
Do you have any 2F push rods?

Yep. Consider them yours. I'll be bringing all the parts that people have requested to the October meeting this Wednesday.

Azrael
09-29-2008, 10:01 PM
If you'll be at the meeting, I'll take the 3 speed clutch & pressure plate off your hands, unless anyone else desperately needs them.

Rogue Leader
09-30-2008, 03:43 PM
Kvanoort,

I will also be at the meeting tomorrow. Thank you for organizing this

Sean Jones

kvanoort
09-30-2008, 04:42 PM
If you'll be at the meeting, I'll take the 3 speed clutch & pressure plate off your hands, unless anyone else desperately needs them.

I'll bring them to the meeting. See you tomorrow night.