PDA

View Full Version : Mad Props to


Shark Bait
02-19-2006, 11:07 PM
Perry and Mike for coming down to Parker and helping get the distributor in my 40 and also pulling my Orion, for hopefully the last time, to fix the infamous "popping out of gear" problem.

Mike, I had to add another .002 shim to get the preload right when I put it back together.

Thanks guys!!

treerootCO
02-19-2006, 11:28 PM
No problem and thank you for the beer. I'll see if I can find the thread on the o-ring. I know the distributor is seated into the oil pump but I don't like the 1/16" gap between the block and the distributor.

Shark Bait
02-20-2006, 12:02 AM
I did a search on MUD and didn't find it.

Get some sleep! :D

Chris

Uncle Ben
02-20-2006, 07:16 AM
No problem and thank you for the beer. I'll see if I can find the thread on the o-ring. I know the distributor is seated into the oil pump but I don't like the 1/16" gap between the block and the distributor.


Aftermarket dizzy?

Shark Bait
02-20-2006, 07:56 AM
No. Late model electronic. I had to hand crank the engine. It was easier with some help! :p