PDA

View Full Version : 80 For sale :(


FJBen
10-22-2008, 10:44 AM
Not happy, but we need to pay off debt, and this is basically what we have of value to do so with. Vehicle/title is free/clear.


This rig is pretty much point and shoot.

Located in Greeley, CO

1993 FZJ-80

Suspension:
Slee 4" front springs (less than 1,500 miles)
OME J springs (less than 1,500 miles)
OME "L" shocks
Slee Caster Plates
Slee DC driveshaft
Slee Extended Brakelines
Slee Rear adjustable upper rear control arms
Slee bumpstop spacers front and rear
Slee sway bar spacer

Drivetrain:
4.88 Gears
ARB lockers front/rear
Center Diff Lock switch, Pin 7 mod
Birfs were replaced by PO with chromolly, but I'll need to confirm that as there was a little confusion on what the shop put in.
(6) 315x75x16 BFG Muds on stock rims, 90% tread, 1 spare mounted, other just tire, both only used for under 10 miles.

Armor/bumpers:
ARB Deluxe Front bumper with Warn M12000. solenoid pack under hood by battery, have OEM buttons (antennae/rear heater) for in cab controls
Metaltech Sliders
Slee Skid Plate
Homemade rear bumper/tire carrier, redesigned still working on it.

Goodies
On Board Air, ARB compressor, Viair 2.5 gallon tank, quick couplers front/rear, air manifold, pressure guage
Kenwood CD/MP3 deck
MTX component front speakers/tweeters
4" rear speakers
MTX Amp, new 200watts bridged
Pioneer slim 10" sub, currently in different box, but might make the "hidden corner box" hits really hard.
Backup Camera, small screen on visor
Wet Okole Seat covers
Perlux fog lamps up front
Brand New Deka AGM battery

Miscellaneous:
O2 sensor replaced 1.5 years Ago
PHH fix with silicon hose kit
New Starter contacts and plunger
Receipts from when it was stock, fluids flushed/changed, I have a huge folder full of all receipts.
I have a 4x6 confer rack that could potentially be in the sale as well/ new wood flooring and heavy duty "Groucho" feet.

A rear carrier bolt came loose but didn't cause any damage. I will also pull the front to confirm all is good on gear set. I will replace the front axle seals with Marlin crawlers while I'm up front and also the ARB O-rings with the new style.

The paint is ok, it looks pretty good, but it's not showroom. There are a few scratches and dull spots. The hood was recently painted with the blackout. One flare has a crack in it. Seats are ok, the front is cracked and why they were covered with Wet Okole seat covers.

It's got 244K on it. Runs great, good power. As far as I know, the headgasket has not been replaced. It has only had 10-12K put on in the last 2 years in terms of miles. All mods are under that mileage as well.

In terms of trade, I'm basically only looking for a 100 series for my wife, (we'd then sell her 80) Or a partial trade on a REALLY cheap 40 to get me around in the winter...like 3K and under.


$11,500 obo
any questions you can PM or call. 9 seven OH, 371-9992

PICS: starting with most recent.
http://www.gallery.markspeterson.com/d/11948-2/Crystal+Mtn+08.jpg
http://www.gallery.markspeterson.com/d/12053-2/Crystal+Mtn+29.jpg

older pics before winch and hood blackout and rear tire carrier re-design

http://forum.ih8mud.com/attachment.php?attachmentid=241929&stc=1&d=1214942099
http://forum.ih8mud.com/attachment.php?attachmentid=241927&stc=1&d=1214941878
http://forum.ih8mud.com/attachment.php?attachmentid=241930&stc=1&d=1214942099
http://forum.ih8mud.com/attachment.php?attachmentid=241932&stc=1&d=1214942189
http://forum.ih8mud.com/attachment.php?attachmentid=241934&stc=1&d=1214942189

PabloCruise
10-22-2008, 08:16 PM
Oh no... I am sorry you are having to list her.

FJBen
10-23-2008, 09:19 AM
BUMP

Deal can be made if we take the ARB/winch off: $10,500

Enigma303
10-23-2008, 10:06 AM
Sorry to hear, but would you part out?

FJBen
10-23-2008, 11:33 AM
Sorry to hear, but would you part out?

Sure, 1 big part then you can pass the rest on :lmao::D no parting out, but thanks for asking.

FJBen
11-11-2008, 09:21 PM
Sale Pending

PabloCruise
11-13-2008, 05:59 PM
Good luck man...