PDA

View Full Version : WTB Return line Nipple and weld on rag joint


Air Randy
12-26-2008, 06:27 PM
Anyone have a weld on rag joint laying around they would be willing to sell? I got my PS gear box & pump installed but I either need to shorten the steering column by about an inch and weld on a new one slightly shorter or put about an inch worth of shims under the steering column bearing plate where the 4 bolts hold it to the firewall. I also need the return line nipple that has like a 14mm end on it that threads into the steering box and the other end you slip a rubber hose over it and clamp it down. Rhanks-Randy 303-319-8976