Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > Members List

treerootCO treerootCO is offline

Rising Sun Member

Visitor Messages

Showing Visitor Messages 1 to 10 of 12
  1. bruce285
    03-04-2016 02:55 PM
    bruce285
    Mike
    You asked me what I had. Here goes.

    Heavy Load Level Stance Suspension 3.5" & 2.5" Lift
    For increased front weight: bullbar, winch, dual batteries, etc.
    Part# OME80HL
    1 - OME 2850J Front Coil Springs (Pair)
    2 - 60070L Front Nitrocharger Sport Shocks
    1 - OME 2863 Rear Coil Springs (Pair)
    2 - 60020 Rear Nitrocharger Sport Shocks
    1 - OME CA77B Caster Correction Kit
    1 - OME SD24 Steering Damper

    I bought a new 3 ton jack and two 2 ton jackstands and some Irwin nut remover sockets with a nutsplitter also. I'm holding out on buying anything else until I can see what's gonna be affected.

    I know you are very busy and I won't be butt hurt if you can't help me out with this install. My driveway is sloped a bit, but I have most everything we need to do the deed with the exception of a shop press and the radius arms that are being rotated in the club somewhere.

    Bruce285
  2. Daytonadogie
    11-23-2015 07:21 AM
    Daytonadogie
    Hi Mike. I am trying to buy a bumper from Waggoneer5 and he told me to contact you. Can you help me out?

    Bruce Uchida
  3. tancruiser
    09-30-2015 08:21 PM
    tancruiser
    Mike my name is Dale up here in Steamboat I met you on the 40s trail I was in my fj45 any way I'm starting an lv build and could use some help sourcing some parts thanks
  4. bruce285
    09-28-2015 12:01 PM
    bruce285
    Mike-I committed to helping out with the apparel for CM16, and would like solicit your help on easing my way into that endeavor. During the 40's Only run we touched briefly on the possibility of setting up PhotoShop on a (my laptop} computer I can use for design work.
    Failing that, would you be interested in submitting a ruff for the design that I can present to the committee? I have an idea or two that I would like to kick around with you if you can spare the time. Call or text at your convenience.
    Bruce 303-881-7532
  5. treerootCO
    03-01-2014 07:18 PM
    treerootCO
    Reach out to my good friend Tim at Gamiviti for the cup holder. http://www.gamiviti.com/html/products_cupholders.html
  6. rtd
    03-01-2014 05:34 PM
    rtd
    Hey Mike - I'm a Mud member (NoCal) and ran across your very well done FZJ8 build. In one of your pics (http://www.risingsun4x4club.org/foru...t=5216&page=42), I couldn't help but notice the center cup holder install. Is there a link to that mod or if not, any details as to parts you used? Thanks for all the ideas, VISA thanks you too!

    Thanks in advance.

    -Robert
  7. Cheeseman
    01-04-2013 03:13 PM
    Cheeseman
    Hey Mike. I have hinted many times about your LED light source. Now I am asking for real what your contact/company is. Gotta get more light inside the 62 and the runner.

    Thanks,
    Greg Luer
  8. Spiderlegs
    07-27-2012 04:40 PM
    Spiderlegs
    Hi Mike I know your on. can you help me now.
    Thanks,
    Neil
    970-586-8687
  9. Spiderlegs
    07-27-2012 04:31 PM
    Spiderlegs
    Hi Mike. I need front leaf springs from an fj55 in a big rush. Do you have any?
    Thanks,
    Neil O'Malley rocky Mountain Rush Tours. Please call me ASAP 970-586-8687
  10. expeditionist
    06-17-2012 11:32 PM
    expeditionist
    Mike,

    How was the pizza? I dug up my current user name and got back on the forum. Its been a little while. I may like to drop by sometime when Im not working to check out your rig(s) up close if that would be ok. Like I mentioned, I am new to the 80 series so I have some questions. Seems you have your truck pretty dialed in. Anyways, enjoyed the brief chat earlier. It was nice to get my mind off work and ON Toyotas for a minute. Take care.

    Chris P.

About Me

  • Signature
    aka Mike D.----->Bio Page KDřGWY
    “He who goes unarmed in paradise had better be sure that that is where he is.”—James Thurber
    "Its better to be thought a fool rather than to speak up and remove all doubt." - Lincoln
    pride is ego, the word I had lost was dignity. The quality or state of being worthy of esteem or respect.
    Ptarmigan build thread - 95FZJ80
    www.root45.com
    www.risingsun4x4club.org

    TLCA #14133

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 01:21 PM
  • Join Date: 08-22-2005
  • Referrals: 8

Friends

Showing Friends 1 to 10 of 11

Contact Info

Instant Messaging
Send an Instant Message to treerootCO Using...
Home Page
http://www.root45.com
This Page
http://www.risingsun4x4club.org/forum2/member.php?u=10

All times are GMT -6. The time now is 06:54 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.