Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   window tint glue removal? (http://www.risingsun4x4club.org/forum2/showthread.php?t=12685)

Phrog 04-03-2010 02:15 PM

window tint glue removal?
 
I got tired of the cave effect, so I peeled off the after-market tint on
the side windows of my 100. The tint came off easily, but it left
behind a layer of filmy glue. Any suggestions on how to best get
that glue off?

-Phrog


1972 FJ40
2003 100

Uncle Ben 04-03-2010 02:52 PM

Goof Off

Phrog 04-03-2010 02:59 PM

Thanks Uncle B. Yup, it works, tho it's slow going.

-Phrog

bigbluefj 04-03-2010 05:20 PM

try methyl hydrate... or water down varsol is used for road tar removal at the car wash a friend works at..

FJ_Mark 04-03-2010 05:33 PM

Go to a auto paint store. 3M makes an adhesive remover that is safe on paint, rubber and plastic. I think I have some around if you want to give it a try.

J Kimmel 04-03-2010 05:46 PM

razor blade, thats how tinters get stickers and junk off windows.

Rezarf 04-03-2010 05:49 PM

Sandblasting.

Corbet 04-03-2010 06:15 PM

razor blade and windex has worked the best for me.

farnhamstj 04-03-2010 07:57 PM

WD40 and razorblade

TIMZTOY 04-03-2010 09:48 PM

razor blade and windex ...... works charms.. the windex eats the glue.. ive done it at liest 6 times on diffrent cars.. tipically takes just a few min per window.. never had a issue when using windex and razorblade

bomber22 04-04-2010 09:21 AM

wd40 works on everything, amazing stuff :thumb:

TIMZTOY 04-04-2010 10:00 AM

ya but your going to get wd40 all over your interior.. and i dont know about you but id rather get windex over my interior than wd40.. oh ya yor going to need about 3-5 razor blades per window.. they go fast.. and its much much eaiser with a sharp blade..

SteveH 04-05-2010 01:30 PM

Ammonia and water - mixed fairly strong, and clean/new single-edge razor blades.

TIMZTOY 04-05-2010 09:55 PM

Quote:

Originally Posted by SteveH (Post 145107)
Ammonia and water - mixed fairly strong, and clean/new single-edge razor blades.

i belive thats the priamry ingredant in windex. and thats why it works so well..

Ron Helmuth 06-19-2010 11:59 PM

thanks guys very much for the ingredients... the MR2 needs this done really badly.Ammonia much cheaper than Windex- I can mix that up fairly easily.

Beachboy 06-20-2010 08:32 PM

Just recently took some tint off my windows. Razor blade first, then windex. Worked good.


All times are GMT -6. The time now is 04:53 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.