Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Chit Chat (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=18)
-   -   Trailer wiring on my 80? (http://www.risingsun4x4club.org/forum2/showthread.php?t=1071)

Groucho 03-29-2006 06:50 AM

Trailer wiring on my 80?
There is a factory connector that is part of the loom entering the drivers side rear that I was wondering could it be wiring for the trailer lights? :confused:

The connector I believe is a six pin female, right in the center of the car. This loom goes into the car at the same place that the ABS/DIFF-Lock harness would to go to get to the front of the car. If anyone knows exactly what this connector is for, that would be :thumb: . Wish I had a picture, but found it too late last night.

nakman 03-29-2006 09:53 AM

There are some plugs more towards the center of the rear, where the Kaymar lights plug into. I think those could be used for trailer lights as well. This is also on my list, I still don't have brake lights working just running lights & blinkers.. and I was wanting to get that done before Moab last year. :doh: :snail:

Hants 03-30-2006 09:25 AM

There are two harnesses back there. According to CDan, they are used for non-US trailers. IIRC, they have running lights, brake lights and reverse lights, but no turn signals.

Many/most 80's came with a tow package that included after-market wiring that taps into the rear brake lights.

All times are GMT -6. The time now is 01:05 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.