Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   Brake booster/pedal issues... after swap. (http://www.risingsun4x4club.org/forum2/showthread.php?t=1262)

Rezarf 04-24-2006 06:19 PM

Brake booster/pedal issues... after swap.
Howdy everyone,

Well, as the story goes, one week before Moab, I am having some issues getting a new to me booster to act right in my 76 fj40. I scrounged a booster from a mid 80's minitruck and bolted it up instead of the old one.

Now, my pedal is nearly at the end of the booster travel right as the lights come on. I know I have NO play between the rod and master cylinder, I can literally feel the brakes are on before I even step on them.

I know I can adjust the rod on the booster that connects to the pedal arm, but that is only going to get me a half inch or 3/4" at best.

Any ideas of what to look for? Am I missing anything?It seems like I need to space the booster off of the firewall, but I am not sure if that is a good idea.

FWIW, I did not bleed the system because I never removed a hard line. Could this make a difference?

Clueless, thanks! :D

Rezarf <><

Rezarf 04-25-2006 12:31 PM

Had to shorten the shaft from the booster to the pedal. Easy fix...

One step closer to CM06!


All times are GMT -6. The time now is 01:28 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.