Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   sm420 nose cone HELP (http://www.risingsun4x4club.org/forum2/showthread.php?t=1288)

bustanutley 04-27-2006 08:51 PM

sm420 nose cone HELP
 
repost from mud

Since I had my cage out i decided to yank my tranny and put a new seal in the output cause it leaked something fierce. Easy enough should be a 2 hour job, NOT. Turns out my nose cone is not machined for a seal, but the input shaft is, mismatched parts Anyone in Denver have a 420 nose cone?

Also will a 3 speed cone work with a little work? I vaguely recall that being an option. Need this like today, need to get my truck smogged but I may just put it together enough to drive, and but I do have to have it together Monday cause that is when i'm rolling to Moab.

Uncle Ben 04-27-2006 09:34 PM

Zack, I do not remember but I think a 465 retainer will work. Make sure your 420 does without a doubt have a sealing surface on the input instead of threads. If you think it leaks now put a rubber seal on a threaded shaft and watch it pour! If it is the threaded shaft then just go to a tranny shop that works on trucks and get the packing you need.

bustanutley 04-27-2006 10:11 PM

it dosn't have the treaded shaft that slings the oil back in, 465 crossed my mind, I dont' have one of those lying around either :( 3speed cone looks like a lot of work to get it to work, dosn't look like there is enough material to machine out a recess for a seal in the 420 nose cone. I think i'm going to throw it together tonight and get it smogged and wait on the cage and if I come up with the correct nose cone from somone drop it. Its dosn't leak THAT bad. just on down hills, maybe I'll plug the hole in the clutch cover and drain it in a cup once in a while :hill:

pics

http://home.comcast.net/~utleyz/nosecone.JPG

http://home.comcast.net/~utleyz/tranny.JPG

Kipper 04-28-2006 08:56 AM

Zach - I would try to find a 465/420 nose cone somewhere in a yard this weekend and get that thing to seal properly. As you know, there are a lot of looooong steep downhill sections in Moab, so the ol' clutch-cover-catch-tank method might get a little out of hand in a short period of time :hill:

wesintl 04-28-2006 09:19 AM

http://car-part.com/ might help you locate an sm420 in the yard. It doesn't work if the yard isn't computerized though.

Uncle Ben 04-28-2006 11:49 AM

Oh Mr. Zack....
 
1 Attachment(s)
Went by the shop (crap starage facility) to look for Isotels gears and found in my 420 spare parts pile this.......

bustanutley 04-28-2006 12:55 PM

any chance I can purchase said nose cone from you Kevin, think :beer: of choice? $$? I"m feeling very desprite at the moment.

:eek: :bowdown:

pm me your digits :)

Uncle Ben 04-28-2006 12:58 PM

Quote:

Originally Posted by bustanutley
any chance I can purchase said nose cone from you Kevin, think :beer: of choice? $$? I"m feeling very desprite at the moment.

:eek: :bowdown:

pm me your digits :)

Nope...just teasin' good luck! :lmao: :lmao: http://www.netshrine.com/vbulletin2/...ilies/moon.gif


PM sent..... ;)


All times are GMT -6. The time now is 02:49 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.