Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   Warn 9.5xp wiring schematic needed (http://www.risingsun4x4club.org/forum2/showthread.php?t=13032)

treerootCO 05-12-2010 01:00 PM

Warn 9.5xp wiring schematic needed
 
4 Attachment(s)
I am in need of a Warn 9.5xp wiring schematic. Emailed Warn and no response. I found the service manual for the 9000 but that is the older style solenoid box. I have power to all but the ground in the remote connection and should only have one. Figured I hooked up red to red when it was supposed to be white or something.

Here are the 3wire and 5wire schematics for the X0000 series winches:
Attachment 18857

Attachment 18858

Attachment 18859

Attachment 18860

corsair23 05-12-2010 02:49 PM

There is one in the manual, pg. 6 - Looks a little different that what you show above...

http://www.warn.com/truck/winches/im...0/68424-C4.pdf

If that doesn't work, try one of these email addresses (or all 3 :))

Wright, Todd [WrightT@Warn.com]
Hall, Aaron [HallA@Warn.com]
Kadwell, Rich [KadwellR@Warn.com]

These are email addys and names of folks at Warn that have helped me in the past, with Todd being the most helpful (and most recent) contact

treerootCO 05-14-2010 10:16 AM

1 Attachment(s)
Here is the .pdf Warn sent for all to enjoy. :) Thank you Mr. McEwen.


All times are GMT -6. The time now is 04:57 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.