Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   tire valve stem 'covers' (http://www.risingsun4x4club.org/forum2/showthread.php?t=13626)

TonkaToy 07-26-2010 03:27 PM

tire valve stem 'covers'
 
So, I have a compressor for 'end of trail' refills on my tires.
I was on a run a while back and saw some of the guys had these valve stem covers that were real easy to work with on deflation. I seem to recall, they just twisted them and they started the deflate, twist them again when you're done.
Any idea where I might get a set of these? Did I imagine it?
I got the pump from Harbour Freight so hopefully, it will serve my needs!
I will find out Saturday on the 40's only run, I guess!
Thanks

FJBRADY 07-26-2010 03:37 PM

You could spring for Stauns, which I have, but I use the cheapo terraflex ones all the time. I would recommend the terraflex ones.

http://www.parksoffroad.com/prodrevi...flatormain.htm

Uncle Ben 07-26-2010 03:41 PM

Quote:

Originally Posted by TonkaToy (Post 156561)
So, I have a compressor for 'end of trail' refills on my tires.
I was on a run a while back and saw some of the guys had these valve stem covers that were real easy to work with on deflation. I seem to recall, they just twisted them and they started the deflate, twist them again when you're done.
Any idea where I might get a set of these? Did I imagine it?
I got the pump from Harbour Freight so hopefully, it will serve my needs!
I will find out Saturday on the 40's only run, I guess!
Thanks

I have these on my 40 and I love them! I also have short rubber ones on the same wheel that I put the pressure gauge on.

http://www.polyperformance.com/shop/...t-p-16505.html

These are much cheaper and work pretty good for what they are...

http://www.parksoffroad.com/prodrevi...unevraduse.htm

rover67 07-26-2010 04:48 PM

I have the Stauns, but I really dig this little guy:

http://www.parksoffroad.com/prodrevi.../ezdeflate.htm

It may be what I get for the 40.

Uncle Ben 07-26-2010 04:50 PM

Quote:

Originally Posted by rover67 (Post 156576)
I have the Stauns, but I really dig this little guy:

http://www.parksoffroad.com/prodrevi.../ezdeflate.htm

It may be what I get for the 40.

That what I use in my 80....I really like it! I should have an extra one I had in my 40 with the previous wheels if you wanna try before you buy.

Corbet 07-26-2010 04:50 PM

I have the ARB deflator that removes the valve core while the special gauge thing is screwed onto the stem. Works well

TonkaToy 07-26-2010 11:21 PM

Thanks for all the responses. I will try and get down to the 4 Wheel parts store this week.
Hope to see some of you on Saturday!


All times are GMT -6. The time now is 06:08 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.