Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   t-case output/pinion nut size? (http://www.risingsun4x4club.org/forum2/showthread.php?t=13677)

subzali 08-02-2010 06:58 PM

t-case output/pinion nut size?
 
Anybody know the t-case output/pinion nut size for, say, a 1977 FJ40? I think a 1 1/8" socket will work, but I don't know if that means it's a loose 28mm or a tight 29mm. :o

leiniesred 08-02-2010 08:35 PM

27mm (I have Dr. Schleg's 40's rear diff on the bench right now.)

that would make it a pretty loose 1 1/8th and a very very tight 1 1/16th

RockRunner 08-02-2010 09:06 PM

Rudes is correct, took it apart 4 times and I have it engrained now:rolleyes:

Matt where do you live, you can use mine if you want.

subzali 08-02-2010 09:10 PM

Just curious, thanks though Tom :thumb:

Just thinking to add to my tool collection a little bit...I need a 54mm hub socket too...hmm...

nakman 08-03-2010 10:46 AM

Quote:

Originally Posted by subzali (Post 157519)
Just curious, thanks though Tom :thumb:

Just thinking to add to my tool collection a little bit...I need a 54mm hub socket too...hmm...

Tom the t-case output is 27, right? pinion nuts are 32.

I bought a pretty cheap set of HF impact sockets a while back, they've got one that goes up to 32mm I think. They're pretty decent 6-pointers.. most of them are kicking around in the toolbox at home but the 24, 27, and 32 are definitely in the trail bag.

Jacket 08-03-2010 12:27 PM

And 46 mm for the crank pulley nut (since we're brainstorming sockets for the tool collection....)

subzali 08-03-2010 07:01 PM

Quote:

Originally Posted by nakman (Post 157588)
Tom the t-case output is 27, right? pinion nuts are 32.

Tim, maybe your 80 is different than my 40 but I'm pretty sure the pinion and t-case output are the same on my 40.


All times are GMT -6. The time now is 12:13 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.