Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   100 mods... (http://www.risingsun4x4club.org/forum2/showthread.php?t=14153)

nakman 09-30-2010 11:54 PM

100 mods...
2 Attachment(s)
thread title may be a pun, we'll see if I actually get to 100. But I've got a few immediate plans for the 100 series, though some of the most obvious I'm going to wait on. In a way this is a do-over with the 80, and I'm hoping to do the first time to the 100 what I wish I had done on the 80.. most of my regrets being somewhat electrical http://www.risingsun4x4club.org/uplo...s/electric.gif

So here we go

Mod 1: Remove ugly fake wood. This is easiest done in a hot parking lot, just pick at it with your fingers. If you get impatient you can use a razor blade, but be careful not to cut into the plastic. To get the sticky stuff off, use a lot of Goo Gone...

nakman 10-01-2010 12:03 AM

Mod 2: Ham radio install. write-up in the Ham section


Bighead 10-01-2010 07:55 AM

Did you make the mic mount?

nakman 10-01-2010 09:14 AM


Originally Posted by Bighead (Post 163624)
Did you make the mic mount?

Yes I did.. :D

farnhamstj 10-01-2010 02:46 PM


I have a spare OEM CV axle you are welcome to. I don't need 2 spares. I also have a 2nd spare bfg mounted on a OEM rim. Again I don't need 2 spares.

nakman 10-01-2010 03:00 PM

sweet, thanks!! :bowdown:

rover67 10-01-2010 03:10 PM


Originally Posted by nakman (Post 163629)
Yes I did.. :D

mod #3!

nakman 10-01-2010 03:20 PM


Originally Posted by rover67 (Post 163648)
mod #3!

Ok mod #3 can be the mic holder.. at this rate I may just get to 100. :D

60wag 10-01-2010 08:42 PM

Yea, it's easier for us 80 guys. And much easier for the 60 and 40 guys.

nakman 10-04-2010 10:27 PM

2 Attachment(s)
Mod #4: Door, map light, and dome LED's.

All times are GMT -6. The time now is 09:27 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.