Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   Shop to setup gears? (http://www.risingsun4x4club.org/forum2/showthread.php?t=1589)

FJBen 06-12-2006 09:07 AM

Shop to setup gears?
 
I *may* be re-gearing here within the next week or so and was wondering about which shops do a good job? I'd just bring the 3rd's into them. if not I'll get my bro-in-law's bro to do the job on the side. (he's alway SUPAH busy tho.)

Any places up northish? ft. fun? greeley? you'd trust?

PabloCruise 06-12-2006 09:28 AM

John could probably do it.

I know my buddy Wade @ Slatten's could git er done...

PabloCruise 06-12-2006 09:30 AM

Maybe Frank would have a club price?

FJBen 06-12-2006 09:36 AM

Quote:

Originally Posted by PabloCruise
Maybe Frank would have a club price?

duh, didn't even think about him...

sometimes this :Princess: stuff goes to my head...I'm more worried about which shirt matches my metallic paint job rather than gear swaps. :D

wesintl 06-12-2006 09:40 AM

Might inquire with Lexusben. I hear he knows how to do this as well ;)

PabloCruise 06-12-2006 10:06 AM

Quote:

Originally Posted by FJBen
duh, didn't even think about him...

sometimes this :Princess: stuff goes to my head...I'm more worried about which shirt matches my metallic paint job rather than gear swaps. :D

Make sure the panites match as well... :lmao:

PabloCruise 06-12-2006 05:18 PM

Talked to John today - says they do it all the time. Spendy part is getting that front third out...

Three Wheel Ben 06-12-2006 06:23 PM

Quote:

Originally Posted by wesintl
Might inquire with Lexusben. I hear he knows how to do this as well ;)

I'll do it, but I'm down in littleton. PM me if you're interested and I'll let you know prices and stuff.

ben

powderpig 06-14-2006 08:43 AM

One thing about the electric lockers in the rear is they need shims to set carrier bearing preload and the back lash. If you do not have the shims in stock, it will take more time to do the job. So you want some one that has done the rear electric locker from toyota from a 80 series. Ben may be your best bet as he may be able to get shims quicker then others if time is a factor. later robbie

Red_Chili 06-15-2006 08:59 AM

Ah, yet another reason I am glad I run minitruck diffs. FJ80 in the front, no shims there either.


All times are GMT -6. The time now is 05:25 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.