Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   AVM Locking Hubs (http://www.risingsun4x4club.org/forum2/showthread.php?t=18484)

Telly 09-12-2012 03:58 PM

AVM Locking Hubs
 
Need to do a complete knuckle/wheel bearing job on my 78 FJ40. The rig has AVM locking hubs and one is leaking. Called Christo and he does not know of a source for replacement gaskets. I've looked on-line with no luck. Any ideas to source these gaskets? I may have to consider making a gasket or finding replacement hubs. Anyone have a couple originals laying around?:beer2:

Telly 09-20-2012 08:37 AM

Does not appear many folks run AVM locking hubs. I'm now considering buying new ones. I'd prefer factory Aisin hubs but the mile marker part #466 manual locking hubs seem reasonably priced (approx. $100 for a pair). Any opinion on these or should I stick with Aisin?

wesintl 09-20-2012 10:43 AM

just get gasket material from napa.

Usually the 78 birfs are the long ones. Do you have the mini birfs or the long 76-78? It's difficult to find the 78-78 aisin hubs since they only came on 55's

SteveH 09-20-2012 12:09 PM

I have used/use Milemarkerh hubs. Not my favorite, but cheap and durable enough for my uses. I dislike that they are hard to turn (somewhat hard to fit fingers in the grooves), and on internal style hubs (Ford trucks), they don't fit tightly and can rattle. Not a deal breaker. I'd look for some older used Warns (although they stick way out) or Aisin.

Perhaps someone like MAF would have AVM kits? MAF always carries some odd stuff.


All times are GMT -6. The time now is 01:38 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.