Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   Front LCA OEM bushing orientation? 80 series (http://www.risingsun4x4club.org/forum2/showthread.php?t=18551)

Corbet 09-27-2012 10:34 PM

Front LCA OEM bushing orientation? 80 series
 
Removed my caster correction bushings and going back to OEM bushings as I installed caster plates.

So my question is how to orientate the OEM bushings? There are two holes 180 degrees apart in the rubber part. Where should I place those in relationship to the ground?

60wag 09-28-2012 08:12 AM

A picture from Christo's site show's the holes in a horizontal orientation:

http://www.sleeoffroad.com/technical/tz_ome.htm

Scroll down the page a ways.

sleeoffroad 09-28-2012 08:14 AM

Search Mud. The diagram is posted somewhere. Early trucks was one way, then they changed it. Can't recall which is the correct way now, but it is on MUD.

Corbet 09-28-2012 03:04 PM

Got a text from Onur. Horizontal is the word.

coax 09-28-2012 03:08 PM

Good to know. I really want to switch away from OME bushings back to stock, but am tempted to go with the drop brackets rather than caster plates. (given my lower lift).

Corbet 09-28-2012 04:57 PM

1 Attachment(s)
Here are the diagrams


All times are GMT -6. The time now is 09:57 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.