Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   54mm Hub Nut Socket (http://www.risingsun4x4club.org/forum2/showthread.php?t=19453)

Fishy 04-17-2013 03:26 PM

54mm Hub Nut Socket
 
Does anyone know where I can buy one in town? IPOR and Low Range sell them, but shipping ends up being more than the actual socket. Socket is $15, shipping is $16.

I'm doing brakes/rotors and a bearing repack next week and need to get one soon. :wrench:

SteveH 04-17-2013 03:27 PM

Your local Sears store is a good place, if they have it in stock.

Fishy 04-17-2013 03:29 PM

Quote:

Originally Posted by SteveH (Post 231149)
Your local Sears store is a good place, if they have it in stock.

I checked Sears, HF and most parts stores in my area.

MountainGoat 04-17-2013 03:31 PM

I got mine from Tool King at W. 6th Avenue & Simms.

rockrod 04-17-2013 03:41 PM

I got mine from napa in Parker.

Fishy 04-17-2013 03:42 PM

Quote:

Originally Posted by rockrod (Post 231153)
I got mine from napa in Parker.

Just called them too.....the don't have it either.

MountainGoat 04-17-2013 04:09 PM

You can borrow mine if Martin is done with it. :hill:

corsair23 04-17-2013 04:35 PM

Quote:

Originally Posted by Fishy (Post 231150)
I checked Sears, HF and most parts stores in my area.

Was that for the 54mm or the SAE equivalent? I got my SAE equivalent from Sears...2 1/8" I think it is? As I recall back when I was looking I couldn't find an actually 54mm anywhere in town close to me.

Your welcome to borrow it...I also have one of those SOR versions that look like a chunk of metal pounded into the rough shape of a 54mm socket :hill:

DaveInDenver 04-17-2013 04:43 PM

Quote:

Originally Posted by corsair23 (Post 231162)
I also have one of those SOR versions that look like a chunk of metal pounded into the rough shape of a 54mm socket :hill:

The SAE is 2-1/8", which is a snug 54mm. This works fine but some claim they are not deep enough, never seemed true for me on my IFS truck, though.

Marlin sells a very nice socket, heavy wall and sized right (doesn't slip), which is what I mostly use. He's also out of stock and still not cheap ($25).

http://www.marlincrawler.com/hardwar...ls/54mm-socket

DaveInDenver 04-17-2013 04:51 PM

Looks like Tool King has both the OTC 6612 and 7612, although they say online only. Dunno.

http://www.toolking.com/otc-6612-hea...FY9eQgodiiAAfw

http://www.toolking.com/otc-7612-toy...LAID=809302481


All times are GMT -6. The time now is 06:23 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.