Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   Made my own short shifter (http://www.risingsun4x4club.org/forum2/showthread.php?t=19674)

egesledder 05-30-2013 12:28 PM

Made my own short shifter
So I made a short shifter for the R150 Tacoma transmission. I lengthened the shaft below the fulcrum by around an inch by TIG welding in a piece of solid rod. and then made a spacer for the whole assembly. It works great! The throw is around 4.5 inches, stock was around 7 inches. I haven't cleaned it all up yet because it was more of an experiment at first, but now I know it will work. The best thing is that I have no money in it:


Here is a drawing I made for the spacer, in case anyone wants to make their own, its pretty simple. I would guess that it will work for the older R150's as well:


All times are GMT -6. The time now is 02:15 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.