Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   For Sale / Wanted (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=3)
-   -   2F Head freshly machined and ready to go. All parts ouf spec replaced. (http://www.risingsun4x4club.org/forum2/showthread.php?t=19748)

rckhound 06-10-2013 10:18 PM

2F Head freshly machined and ready to go. All parts ouf spec replaced.
 
Juat what the heading says. I have a fresh rebuilt and machined 2F head ready to bolt up with a felpro kIt for removing and replacing the head. Looking for 450. have $500 just in machine work and parts on the head. let me know.

rckhound 06-10-2013 10:20 PM

I guess I should proof read before I post.

rckhound 06-11-2013 07:53 AM

1 Attachment(s)
Pictures

SteveH 06-11-2013 10:49 AM

What year is the head and was anything milled from the head for a compression bump, or was it just machined for flatness?

PabloCruise 06-12-2013 03:05 PM

Quote:

Originally Posted by SteveH (Post 234339)
What year is the head and was anything milled from the head for a compression bump, or was it just machined for flatness?

Right. Is this for domed pistons, or flat?

Did you get the oil galley plug tapped and plugged?

Stock valves or did you go Chevy?

rckhound 06-12-2013 03:19 PM

Domed from a 79 2f machined to be flat and not positive on the oil galley. Ill check it tonight. Everything was replaced with new original type parts as far as I can tell. I have the receipts.

rckhound 06-12-2013 03:21 PM

I will be headed to redline in the springs tonight If you want check it out Steve. 303.915.nine528. Leave here at 5.

rckhound 06-14-2013 12:43 AM

I need 40 parts and I am not afraid to trade with no cash. looking for 33x10.5's for stock steelies and possible tub sheet metal for a 79'. Any money or trade is just going back into the 40.

rckhound 06-14-2013 12:46 AM

I also accept all major credit cards via square card!

SteveH 06-14-2013 10:45 AM

That's not the right year for my block, but thanks!


All times are GMT -6. The time now is 01:26 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.