Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   For Sale / Wanted (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=3)
-   -   Front Axle Parts Needed (http://www.risingsun4x4club.org/forum2/showthread.php?t=19828)

mikeyhcrana 06-25-2013 07:34 AM

Front Axle Parts Needed
 
I need everything circled in red.

http://imageshack.us/a/img404/66/imk.png

http://imageshack.us/a/img199/8696/qxp.bmp

http://imageshack.us/a/img33/1259/qctc.png

MDH33 06-25-2013 11:39 AM

I have a full set of the shims leftover from a Marlin kit that I didn't need. You're welcome to them.

teamextreme 06-25-2013 11:55 AM

I have the steering arm, castle nuts and knuckle nuts.

mikeyhcrana 06-25-2013 01:40 PM

Quote:

Originally Posted by MDH33 (Post 235189)
I have a full set of the shims leftover from a Marlin kit that I didn't need. You're welcome to them.

I would appreciate them very much. Please let me know where to get them. Thank you.

Quote:

teamextreme I have the steering arm, castle nuts and knuckle nuts.
How much do you want? Do you have any of the cone or lock washers for the steering arm to knuckle hardware?

Also, I'm trying to find the knuckle alignment tool but I don't have $450. I need my Matco guy to find one so I can put it on my account. Unless I could rent or find a used one...

MDH33 06-25-2013 01:56 PM

Quote:

Originally Posted by mikeyhcrana (Post 235193)
I would appreciate them very much. Please let me know where to get them. Thank you.

PM me your address and I'll drop them in the mail.

egesledder 06-25-2013 04:01 PM

Jim's Used Toyota Parts off of 63rd and York should have all of that stuff.

teamextreme 06-25-2013 06:03 PM

They're yours, you can come pick them up. Paying it forward to help out on your misfortune. I'll PM you my work address in Commerce City and you can come pick up what I have. I'll bring them in tomorrow and you can come by 8-5 ish any day to pick up.

baja1d 06-25-2013 11:28 PM

There are guys in RS that have knuckle alignment tools. I think I borrowed DanS's

mikeyhcrana 06-26-2013 01:53 PM

Quote:

teamextreme They're yours, you can come pick them up. Paying it forward to help out on your misfortune. I'll PM you my work address in Commerce City and you can come pick up what I have. I'll bring them in tomorrow and you can come by 8-5 ish any day to pick up.
Thanks a lot, are you around at lunch time? I'll have to cruise up there on my lunch.

Quote:

Originally Posted by baja1d (Post 235214)
There are guys in RS that have knuckle alignment tools. I think I borrowed DanS's

Well, the Matco guy ordered me one. They are only $200 from him so it'll be worth it to have, I love tools.

OilHammer 06-26-2013 05:18 PM

I have two sets of new aftermarket Aisin style locking hubs. I'm not positive on the length you need and whether these would fit. They are "high" quality, but definitely not OEM. If you are running 37's, I would not recommend them. Stock tires w/ open diffs, no worries there. If this is something you are interested in, let me know and I'll dig up my pricing sheet.


All times are GMT -6. The time now is 04:56 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.