Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   Power steering connections, FJ60 (http://www.risingsun4x4club.org/forum2/showthread.php?t=20922)

euroford 02-23-2014 12:46 AM

Power steering connections, FJ60
 
so... trying to reassemble this FJ60 steering system, i think i must be missing something where the lines connect to the steering gear and pump, the fitting are bottoming out and leaked like crazy.

i've just burned an hour of my life googling this, and i think there should be some sort of crush washer or whatnot for the flare fitting to seat against, yeah?

i can't seam to locate much info about this, not a part number or photo or anything. surely one of you guys have gone and lost these things before...

do ya think i'll have any luck at napa tomorrow, or got a better idea?


at any rate, ya'll should know, now that i've swapped cruiser axles, brakes, steering, and master cylinder into my 'jeep', it drives better than at it every has! :lmao:

ttubb 02-23-2014 08:05 AM

I think pictures of what you are working on would help. :wrench:

baja1d 02-23-2014 08:54 AM

Yes, pretty sure there are suppose to be crush washers

CardinalFJ60 02-23-2014 09:07 AM

I could swing by
 
I'll be running around today at some point (I'm in lafayette). Maybe taking a look at mine would help? I just replaced one of hoses on my 60 with a Napa hose, they had it in stock here in Louisville and was plug and play. (IIRC, NLA from Toyota)

wesintl 02-23-2014 09:07 AM

At the box s the flair sits against a brass fitting. doubt you will find it at napa


OEM Part # 90410-06030 3.69/each

http://forum.ih8mud.com/60-series-wa...87-fj60-3.html

euroford 02-23-2014 01:01 PM

awesome guys, that totally helps and thanks a bunch!! typical... the whole train held up due to a tiny little $3 part.

time to go do the dig through coffee cans fulls of nuts/bolts/stuff and see if i can magically find those pieces, or otherwise locate them somewhere.

if i end up hosed for today, i'm willing to bet i could find some of those up at yoda jim's. i'm also not sure about this... but i think you might need the same things for hookup to regular saginaw stuff. i might just have to bug napa and see what they got, won't hold my breath though.

i gather ya'll were looking for some overall project photos, not specifically the steering stuff. so here's the little mutant:

http://i59.tinypic.com/2z4wuq1.jpg

build thread here:

http://www.pirate4x4.com/forum/jeep-...my-willys.html

euroford 02-23-2014 02:08 PM

Quote:

Originally Posted by wesintl (Post 246859)
At the box s the flair sits against a brass fitting. doubt you will find it at napa


OEM Part # 90410-06030 3.69/each

http://forum.ih8mud.com/60-series-wa...87-fj60-3.html

wooooo hooooo!!! doin the happy dance! since that thread had a photo of the part, i was able to go through all of the random coffee cans and actually locate these things. :beer:

MountainGoat 02-23-2014 03:36 PM

Nice Wescue. :D


All times are GMT -6. The time now is 06:30 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.