Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   Ham & CB Radio Corner (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=20)
-   -   Expo Portal Ham Radio Net - 19 FEB 2008 @ 19:00 PST - GUEST SPEAKER (http://www.risingsun4x4club.org/forum2/showthread.php?t=5924)

Crawler#976 01-25-2008 06:31 AM

Expo Portal Ham Radio Net - 19 FEB 2008 @ 19:00 PST - GUEST SPEAKER
 
On the Western Reflector node #9251

Topic is: ARES/RACES

Guest Speaker Lloyd Halgunseth, WA6ZZJ - District Emergency Coordinator and RACES Radio Officer from Yavapai County, AZ. will be joining us to educate/inform us on ARES/RACES.

http://k7yca.org/

Please sign up below!

Mark - KE7IXX

RicardoJM 02-18-2008 09:44 PM

I'll be dialing up the Western Reflector (node #9251) for the net. I have access to a couple of repeaters that are IRLP enabled. The first one is open to the public and the second one is for members of RMRL. As this is not a scheduled event on either of these repeaters, there may be people already using them at the time we would like to dial into the Expo Portal Net. This was what happened in December and so we were about 10 minutes late in getting in. With access to two repeaters, we'll try one and if it is busy fail over to the second.

At about 7:55 (MST) I'll dial up the reflector on 146.805 (pl 186.2), if the node is busy I'll move over to 145.340 (pl 103.5) to dial up the reflector. If both repeaters are in use, we can all touch base on the 145.145 (pl 107.2) and figure out the next steps.

RicardoJM 02-19-2008 07:36 PM

There seems to be an issue with the IRLP note on 148.805, therefore I will be bringing the net up on 145.340 (pl 103.5).

Crawler#976 02-19-2008 09:01 PM

Thanks to everyone that checked in - there were some great questions asked!

DaveInDenver 02-19-2008 09:20 PM

Quote:

Originally Posted by Crawler#976 (Post 63127)
Thanks to everyone that checked in - there were some great questions asked!

Thanks for having it Mark, we really appreciate that you do this.


All times are GMT -6. The time now is 01:48 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.