Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   ifs front axle - school me (http://www.risingsun4x4club.org/forum2/showthread.php?t=7418)

Beater 06-17-2008 01:27 PM

ifs front axle - school me
 
ok - so how long does it REALLY take to do a cv axle on a runner or taco? Evidently the t100 is the same as a runner/taco, and I have a bad axle on this beast...

it's not liking the full lock right turns

j

Squishy! 06-17-2008 01:38 PM

Easy.

Remove ADD cap and snap ring holding the axle in.

Remove four bolts on lower ball joint (14mm)

Remove sway bar bolts (14mm deep) (both sides) on lower control arms,

Remove lower bolt for the shock (22mm?) and use a jack to push on the hub to lift the hub up and away from lower control arm (the spring tension is on the upper a arm),

Remove the (6, 17mm) nuts on the CV that connect it to the diff,

Slide the spindle out of the hub and you are home free my man

Squishy! 06-17-2008 01:39 PM

Oh and feel free to pry down on the lower a-arm as needed

Beater 06-17-2008 02:32 PM

ok - so same as every other fwd/awd. 2hours r/r?

Seldom Seen 06-17-2008 02:49 PM

Quote:

Originally Posted by green machine (Post 77485)
ok - so same as every other fwd/awd. 2hours r/r?

I've got it down to under an hour. B/4 you go tearing into it make sure that the sound you hear, at full steering lock, is NOT the the steering stops rubbing. If the plastic caps on the adjuster is worn through or missing, they make a hell of a noise esp. when hitting a bump at full lock.

Beater 06-17-2008 03:15 PM

Quote:

Originally Posted by Seldom Seen (Post 77486)
I've got it down to under an hour. B/4 you go tearing into it make sure that the sound you hear, at full steering lock, is NOT the the steering stops rubbing. If the plastic caps on the adjuster is worn through or missing, they make a hell of a noise esp. when hitting a bump at full lock.

will do. the boot is trashed and gease is gone. rebuild at least.

j

Red_Chili 06-17-2008 04:50 PM

New is more sure then, and not prohibitive if aftermarket or good boneyard is obtained.

Squishy! 06-18-2008 07:41 AM

CVJ does great rebuilds. just give them your core. Burt uses them regularly


All times are GMT -6. The time now is 12:36 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.