Rising Sun Member Forums

Rising Sun Member Forums (http://www.risingsun4x4club.org/forum2/index.php)
-   General Tech Forum (http://www.risingsun4x4club.org/forum2/forumdisplay.php?f=17)
-   -   tubing out my front fenders on the 40 (http://www.risingsun4x4club.org/forum2/showthread.php?t=8006)

SROR/AKA 2BAD 08-24-2008 09:51 PM

tubing out my front fenders on the 40
 
4 Attachment(s)
from 90" stock WB (i think) to 104" WB, i needed to do something with the front fenders.
here's the start and the fenders are all welded up and ready to mount up.
finished pics are not shown.
rear 1/4s are next :thumb:

Mendocino 08-24-2008 09:53 PM

Looks good Jim!:thumb:

Rezarf 08-25-2008 08:18 PM

Mmm.... those look great Jim.

farnhamstj 08-25-2008 08:26 PM

Very cool. Waiting for more pics.

wesintl 08-25-2008 09:55 PM

Slick.. can't wait to see em skinned with SROR lazer cut in them ;)

MDH33 08-26-2008 07:48 AM

Are you planning on skinning them? That would look really slick if you could hide the engine compartment stuff.

SROR/AKA 2BAD 08-26-2008 07:28 PM

Quote:

Originally Posted by MDH33 (Post 84355)
Are you planning on skinning them? That would look really slick if you could hide the engine compartment stuff.

i'm going to try to use my stock fenders to skin the tops.
possably line the inner with expanded metal and use some sheet here and there to mount what needs to be mounted.
possably use some heavy rubber to keep road dirt out.

who knows, i'm just wing'n it :thumb:

SROR/AKA 2BAD 08-27-2008 08:37 PM

5 Attachment(s)
had some time off today, so while i was cutting steel i played with one side.
not sure if i'm going to use the stock fenders to skin these (see pic of a perfectly good 40 fender that i cut today) :D
or just skin them with some sheet.
i do have some aluminum sheet i could use for this :thumb: keep it a bit lighter.....like it matters ;)

SROR/AKA 2BAD 08-27-2008 08:38 PM

2 Attachment(s)
couple more

SROR/AKA 2BAD 08-30-2008 09:04 PM

the rest of the build
cause i'm 2 lazy to post the pics:

http://forum.ih8mud.com/40-55-series...der-build.html


All times are GMT -6. The time now is 05:40 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.