Thread: Broken Easy Out
View Single Post
  #8  
Old 09-13-2005, 12:45 PM
Rzeppa's Avatar
Rzeppa Rzeppa is offline
Cruise Moab Committee
 
Join Date: Aug 2005
Location: Kittredge CO, USA
Posts: 4,956
Default

Cutting the slot will be the easiest if it works, and it's certainly worth a try. Welding a nut on can sometimes work too. Easy outs can not be drilled out, even with carbide bits, BTDT. EDM can get them out, but you'd have to get it to an EDM machine :-(
__________________
Jeff Zepp
Kittredge CO USA
1971 & 1976 FJ40s, 1978 FJ45, 1987 FJ60
Rising Sun 4WD Club, TLCA #4063
http://american3dprinting.net/
Reply With Quote