View Single Post
Old 01-29-2010, 06:09 PM
Red_Chili's Avatar
Red_Chili Red_Chili is offline
Hard Core 4+
Join Date: Aug 2005
Location: Littleton CO
Posts: 8,400

Originally Posted by thefatkid View Post
I used the 3.4 flywheel, clutch, and disc. The 3.0 throwout bearing must be used with the 3.0 belhousing.
That's what I am running.

Of course, I am just the dad and everything....

You have to measure the tranny etc. but if you like you can measure mine when you come over to fab the crossover. FAIK the R150 and 151 are extremely close dimensionally. Internally they are VERY close. Same rebuild kit.
-Bill Morgan
Heb Dduw, heb ddim; Duw a digon
Abnormally aspirated
Bio Page
I'm that gun-totin', farm-raised, evangelical, pro-environment, OHV ridin'/drivin', Southern civil rights pro-labor Liberal yo' momma told you couldn't possibly exist.
Reply With Quote