View Single Post
  #1  
Old 09-17-2010, 07:58 PM
Zero1 Zero1 is offline
Rock Stacker
 
Join Date: Sep 2009
Location: Arvada, CO, USA, Earth
Posts: 26
Default Locker axle swap not locking

repost from Mud but maybe someone here will catch it with less posts streaming through

I'm struggling to figure out what I skipped or have overlooked. The front locker plugged right into the existing harness. The rear plugged into the swapped subharness which plugged right into the existing harness inside the rear firewall. The locker switch plugged right into the existing harness. ECU replaced.

What might I missed?


(97 LX450. Axles and ecu from 97 lx450; engaged fine upon removal from donor)
Reply With Quote