View Single Post
  #2  
Old 09-11-2006, 10:05 AM
wesintl's Avatar
wesintl wesintl is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: in da house
Posts: 7,463
Send a message via AIM to wesintl
Default

Here is some info on the Crystal Mill, how it worked and what it did.

"Though some misinformed people have dubbed it the “Dead Horse Mill”, that name is erroneous and was never historically used. Historically speaking, the Mill was known as the Sheep Mountain Power House, and was located on the Lost Horse Millsite. Today it is known as “The Crystal Mill”.

The mill, constructed in 1893, harnessed the river adjacent to the mill to power the air compressor housed inside. Early engineers had built a dam across the river, which funneled water down the vertical penstock (the ladder-like structure) onto a horizontal wheel, which drove an axle in the penstock. The penstock powered the air compressor. In turn, the enormous compressor ran drills in the nearby Sheep Mountain and Bear Mountain mines. The drills were used to bore holes in the mine walls for the placement of dynamite. Once the dynamite was detonated, the miners removed the ore.

The mill closed its operations in 1917. Continuing efforts to preserve it have been aided by Gunnison and Aspen Historical Societies, residents of Crystal and Marble, and interested individuals caught by the spectacle of the old Mill."

http://www.marblecolorado.net/crystalmill.html

http://www.ghosttowngallery.com/htme/crystal.htm

I'll post my pics tonight.
__________________
See you on the trail
WREK
Couple o' FJ40's, BJ70, UZJ100, TDI 66FJ40,82FJ60,97FZJ80
TLCA#4180
Reply With Quote