View Single Post
  #5  
Old 02-22-2011, 08:12 AM
rhyary's Avatar
rhyary rhyary is offline
Locked
 
Join Date: Mar 2010
Location: Albany, NY
Posts: 295
Default

Operation:
Much to learn here. I read the manual 50 times, went back to the General study book.

I am not clear how much the RF gain should be, what the speech processor should be, I played with the filters (NAR 1.8 for SSB), and DNR, etc etc, but because I am not on the other side, I don't know what effect it all has on the receiving end.

I have to figure out the scan. I programmed it to scan only the 20M (14.150 - 14.350) so that works great. but the scan does not stop. It flies by the conversations. I can hear a conversation comes into focus, and then it scan right by it. I have to stop it manual and go back. Which defeat the purpose of the scan.

It is daunting how much more complicated HF is compare to VHF/UHF.

I like it!
__________________
_____________________________________________
96 LX450
Albany, NY
http://bestcamptable.com/
KD2KDK

Last edited by rhyary; 02-22-2011 at 09:29 AM.
Reply With Quote