Thread: Knuckle Rebuild
View Single Post
  #6  
Old 10-22-2006, 09:21 PM
farnhamstj's Avatar
farnhamstj farnhamstj is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: vail co
Posts: 2,586
Default

Having a partswasher is very helpful. If not you'll want about 5 cans of brake cleaner per side. Have 3 5gal buckets and many rolls of the blue throw out paper rags. You don't need to separate the axle/birf. It'll take you 6 hours for the 1st side and 3 hours for the other. Check that you can get the 4mm bolts out of your hub before you begin your project. That got me as I had to replace hubs also $100 I didn't budget. Get a few punches and razorblades, gasket remover. Cardboard and lots of it for your garage floor.
__________________
98 uzj100. Factory rear-ARB front locked 4.88's. ARB Bull, Warn 9000, Irbis rear bumper, Slee sliders and belly pan. OME t-bars w/863 rears, HID, XM
KD0GWO
Reply With Quote